danpetrow
-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Everything posted by danpetrow
-
Thx for the info, I'll look into it later in the week when it warms up a little. Starting to get a little cool in Jersey
-
Dick this is what my FRB looks like along with the label explaining what’s there. I don’t have DRL’s just fog lights
-
Thx , I look forward to your reply. BTW I,ll need to know what relay to remove
-
I know this has been addressed before and I apologize for asking but I can’t find the answer. I want to get my fog lights to work without the headlights being on. I think a relay had to be jumped or a wire swapped in the front relay bay of my ‘99 Windsor. I’d really appreciate any help someone could offer. Thx Dan
-
You could try calling 3M at their help line. Their # is 800 3M Helps Worked for 3M for 32 years, Just not in the adhesives part
-
Thanks for your input, the mac valve is located on the firewall above the genset. No worries about crawling under the rig. Still having a hard time locating the mac valve (is it discontinued? Pulled all the hoses off and sprayed ports. Don't know if it helped Has anyone had experience with substituting a Humphery Valve. Again The mac valve is a 4 port unit 45A-AA2-DDCA-1BA. And the Humphrey Valve D1052 from NWRV Supply. Thx, Dan
-
99' Windsor My step cover mac vale leaks from the exhaust port when the pressure @ 120 PSI. After shutting down the rig the pressure drops (from the leak) and @ 60 PSI it stops. The mac valve is a 4 port unit 45A-AA2-DDCA-1BA. I've been told the it can be replaced with a Humphrey Valve D1052 from NWRV Supply. Has anyone had experience with this valve. If so, I need a hookup diagram. As far as I can tell, it doesn't have an exhaust port. Do I need that port. Dan Petrow
