Jump to content

DVerstra

Members
  • Posts

    12
  • Joined

  • Last visited

1 Follower

Required Information

  • FirstName
    Dave
  • Make
    Holiday Ramber
  • Model
    Navigator
  • Year
    2007
  • City & State
    Grandville, MI

Optional Information

  • Full Address (Optional)
    3656 Ponderosa SW, Grandville, Michigan, 49418
  • Brief Bio (Optional)
    Retired Tool & Die Maker

Recent Profile Visitors

284 profile views

DVerstra's Achievements

1

Reputation

  1. Speedwrench in Hudsonville, Michigan has serviced my motorhomes and done a great job. They offer mobile service also. https://www.speedwrench.com/
  2. Quote from Frank McElroy "Yes, you have a leaking valve. Likely a small amount of debris is keeping it from fully seating. When bringing in the slide hold the slide in button for a few seconds until you hear a pitch tone change from the pump. This might clear the debris from the valve seat. " I used this method when closing the slides. Woohoo! It appears to have worked. No problem with slide extending during trip North from Florida. Thanks Frank and others for this TIP
  3. Toby I have 10 of each available. PM me if interested
  4. Coach did not come with slide locks that I know of other than the Driver side front slide has a lock mechanism. I don't see a way to insert a slidelock on the passenger side. The passenger side slide is within an inch of the ceiling when closed and has an accordian style cover on the side.
  5. Thanks for the help on this. I don't see any leaks. I'll try the "purge" idea and see if the problem goes away on the next drive.
  6. While driving through a hilly area with a lot of curves in the road, our passenger side front slide worked its way out. I looked in my mirror and it was out about 8". I found a pullout and placed the transmission in Park. Then I brought the slideout in. The entire slide was out not just one corner. It is a hydraulic slide. The valves and reservoir tank are under the front stairway with access through the step. I checked the reservoir and the fluid is correct on the short dipstick. What are the possible causes? I'm thinking of either a valve that is allowing the fluid to bypass or a cylinder issue.
  7. You're very welcome Don. I have 10 Driver side and 10 passenger side completed. If anyone is interested, please PM me. I have strengthened the tabs also
  8. I've been making these on my son's 3d printer for my own use since last year. They are made with black nylon. I can make some for those of you without a 3d printer source. PM me with amount needed. I'm thinking of going to The Gathering with a bagful as party favors. :>)
  9. We did the tour with Fantasy RV a few years ago. Our two Corgis were treated well by the campground owner in Thompson. She walked them and fed them. Saw a great Northern Lights display one night. Saw only two bears since it was early in the season. One at a distance and one close up.
  10. On the liftmytv website in the parts section they offer a wired remote for their controller. If you are tearing things apart to fix a problem with a missing remote, wiring the lift with an additional switch or ir remote might make sense. I ended up wiring a toggle switch for mine This is my first post so please tell me if I violated any norms.
  11. Great Site. Testing my signature
×
×
  • Create New...