sailorp40

Hi Dave Merry Christmas to you and your family. I have the 2005 Dynasty Diamond IV for sale, I have sold it so you can delete it. Thanks for a fantastic forum its been a great source for information Thanks George Brennan

Try RV Supply in Eugene, OR. I picked up some several years ago from them

My 2005 Dynasty Diamond IV is still available 😀 George Brennan

Might want to check out my 2005 Dynasty Diamond IV I have for sale listed in our classifieds. George Brennan 2005 Dynasty Diamond IV Puyallup, WA

Thanks for the suggestions, I've already checked the frb, but will check out under the dashboard near the steering wheel

I want to thank all those who replied to my message. Actually I am Looking for the location of the ABS Test Button and indicator lamp, on my 2005 Dynasty, so I can troubleshoot this problem. The symptoms that I have is that I am in cruise control and the ABS light comes on intermittently, when it does my cruise control shuts down. On my Aladdin display panel the speed shows 0 which tells me the ABS is somehow connected to the cruise control. Any help would be greatly appreciated George Brennan 2005 Dynasty Diamond IV Puyallup, WA

Hi Gang: I have a 2005 Dynasty Diamond IV. I am having problems with the ABS light and cruise control. I have been reading thru past posts concerning this issue and need to find the ABS diagnostic board in order to troubleshoot and figure out what my problem is. I've looked in the front run bay with no success. Can someone out there who has a 2005 Dynasty point me in the right direction. Thanks in advance or any info, George Brennan 2005 Dynasty Diamond IV Puyallup, WA

I take my coach into Kaiser Brake and Alignment in Eugene. Phone is 541 344 5887. They do great work, I've been using them for 15 years. Hope this helps George Brennan 2005 Dynasty Diamond IV

I would keep the wood panels off of the doors in case you need to replace some wood in the coach as it would match. George Brennan 2005 Dynasty Diamond IV

Hi Gang: I have a 2005 Dynasty Diamond IV. One of the strings on my day-nite shade broke. The shade is located on the passenger side over the couch in the living room. I am having difficulty in try to remove the valance in order to get to the blind. I found brackets and removed the screws in the four corners of the valence, however it still will not come down. Are there any other brackets holding the valence in place and how do I get to them? Thanks in advance for any help, George Brennan 2005 Dynasty Diamond IV Florence, AZ

Gee guys this is getting way out of line. I just got a call from the hydraulic shop and they found someone who can weld cast iron and it will be ready on Monday. Thanks for all the help and suggestions, I really appreciate it George Brennan 2005 Dynasty

Thanks David, I went thru the list and the only one I could find was Visone and they wanted $1100 for a used pump. I was hoping that someone in the group had an old broken one that I could use for parts. Thanks to everyone for your suggestions George Brennan 2005 Dynasty

Hi Gang: Well, the hydraulic pump saga continues. I have a 2005 Dynasty and the hydraulic pump that supplies the power steering and cooling fan motor was leaking. I ordered a seal kit and when it came in, I had the pump removed, and took it over to the people that work on pumps. A couple of hours later I get a phone call telling me they had dropped the pump and broke an ear off the mounting plate. Does anyone have an old broken pump that I could buy the mounting plate off of it. Any help would be greatly appreciated, George Brennan 2005 Dynasty

Yes, sorry the part number is from REV. Seal Kit P/O 18766 REV #10488892 Thanks, George Brennan

The problem is I am trying to get South in a couple of weeks and don't have the time to wait for it to come from England.

Hi Gang: A couple of weeks ago I asked for help on my hydraulic pump leak. I got a great response from several members and I thank you very much. I have a Sauer Danfoss pump numbered C45.0/20.5L 36844159160. Sauer sold the assets of Danfoss to Dynamatics Hydraulics. I talked to Gordon at Advanced Fluid Sysytems, 763 607 7628 who provided me with a new part number, 550136844159160. He said he could get the pump in 2-3 weeks and the price was between $700 and $800. I found a used on at Visone Components for $1100. I decided to get a seal kit from REV for $259 (I know, I know the price was hiway robbery) but it will be delivered this Tuesday I checked with my mechanic and he recommended a local hydraulic shop that can do the repair. I want to thank everyone for all your help, this is truly a great site. George Brennan 2005 Dynasty Diamond IV

Hi Gang; I have 2005 Dynasty Diamond IV with the Cummins ISL400. The Sauer Danfoss Hydraulic Pump is leaking around the end cap. I have the model C45.0/20.5L 36844159160. Is this repairable and if so are there parts available. If it not easily fixable, where can I find a new or rebuilt one? Thanks in advance for all your help George Brennan g.brennan01@gmail.com

I had a similar experience and it turned out to be my chassis battery severelly out gassing. Might want to check it out Hope this helps George Brennan 2005 Dynasty Diamond IV

Progressive paid because it was considered road hazard. The pointy thing was used to point out the hole in the radiator Thanks for your reply George Brennan

Hi Gang: I have a 2005 Monaco Dynasty Diamond IV. Twice in the last 10 months I"ve gotten a hole in my side mounted radiator. The first time the hole was in a bad location so the radiator had to be replaced (Progressive Insurance paid the whole bill). The second time I got a hole in the upper right hand corner where the inlet hose is. I've attached pictures. I am looking for a solution for keeping foreign objects away from the radiator area. Any help or advice would be appreciated. George Brennnan

I picked up a basic Watts regulator from Home Depot and put together a system using brass fittings that are 5/8" in size to have plenty of water flow. Hope this helps George