Joe E.

Tom, Thinking about what you said, during my generator switch issue, my inverter was on. So I now 'assume' the 30 amp light on the EMS was indicating what was available from my inverter and batteries. So the two observations, no generator start with interior switches and 30 amps available on EMS, were separate issues. They just seemed to go together at the time. Thanks for the knowledgeable response.

A search for generator dash switch brought up this post which fixed my exact issue. Another indication I had was only 30 amp available on the EMS, but 50 amp on shore power. Thank you Monacoers.org, again.

Got it. Thanks.

Thanks Ron. I will give Richard a call. Still need a shop to do the work.

2008 HR Ambassador 40SKQ, Cummins ISC-360, DPF, 95K miles. Dash A/C compressor froze up, shredded serpentine belt. Truck repair business sourced and installed new compressor and belt, but that's all. Refrigerant hoses and electrical not connected to new compressor. Need recommendations for A/C service shops in Jacksonville, FL area ( within ~100 miles) to finish the job. Probably need to remove and install new dryer and expansion valve, and the normal evacuate, clean, vacuum, refill, test. If anyone has part numbers for the dryer and expansion valve, that would be very helpful. I will check the parts list.

https://www.fillernecksupply.com/copy-of-aluminum-2-npt-threaded-filler-neck-pipe-sections-choose-length/ Joe E. 08 Amb

Milling about smartly, standing by.

Do the paint shops in Mexico remove and reapply all of the caulking as part of the job? Belt lines, slides, windows, vent panels, etc? Joe E. 08 HR Amb

Ok, thanks. Now I have an image of what I am looking for and a pretty specific location. Will be traveling without the RV till the end of August so will hopefully provide a success story sometime after that.

I posted earlier about having this same exact problem in my 08 HR Amb. I have not found a flasher module. Could you please be more specific as to where you found them in your dash?

Thanks for the inputs. I am hoping the resident awning guru Mr. Throgmartin will also chime in.

Anyone added a pull-down awning to a window that does not have an awning? The large hallway window in my 08 HR Ambassador 40 SKQ allows a high amount of heat and I would like to add an awning to the window. I have found a couple of sources such as https://www.carefreeofcolorado.com/products/sl-window-awning.html. Anyone have experience with add-on awnings such as this? Are there other manufacturers who provide better quality, IYOO? Thanks.

George, Only been on one trip with the RV890. Learned 2 things: 1. The suction mount will not hold on a textured slightly curved dash (duh). 2. The unit will not download and install a map update when connected via WiFi to a phone hotspot or MiFi. It looks like it is going to work, but never installs the update. However, using the supplied USB cable to connect the unit to a laptop that is connected via WiFi to a phone hotspot or MiFi and running GarminConnect on the laptop works fine. Maybe more after the next trip.

I found a bean bag mount for the RV890 on Amazon. Less than $10. Weighs 1lb-3oz. 2lbs-10oz with the RV890 attached. The disc is 3 7/8 inches (95mm) in diameter. The RV890 suction cup is about 3 1/2 inches in diameter. Has a rubber pad and a sticky ring on the bottom to minimize slippage. Works like a charm. https://www.amazon.com/AmazonBasics-Dashboard-Magellan-Portable-Navigators/dp/B0772CR74K/ref=sr_1_3?dchild=1&keywords=bean+bag+dash+mount&qid=1626114350&sr=8-3 Amazon also has 95mm dashboard discs to mount to the dashboard to use with the RV890's mount's larger suction cup. Two for less than $10. https://www.amazon.com/Randconcept-Adhesive-Dashboard-Mounting-Diameter/dp/B07SPJ7BSX/ref=sr_1_1_sspa?crid=1WLCCT6FEY2GR&dchild=1&keywords=95mm+dashboard+mounting+disk&qid=1626114777&sprefix=95mm+dashboard+mount%2Caps%2C429&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzQVpLSVlSRkdERFkwJmVuY3J5cHRlZElkPUEwMjQ3OTQ4Mk1BRUNGQzhWMFBERSZlbmNyeXB0ZWRBZElkPUEwMDM4NDY1R0NWMkFPM003VUVWJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Alas, the new turn signal switch did not fix the problem. I traced the wiring and didn’t find any breaks or unplugged connectors. I haven’t found where a ground wire may be grounded. Any help with that would be appreciated. I did a check of all the fuses so I will check them again, then test the flasher relays. Any other ideas?

Took another look at the steering column covers, and..... Wahla!! They came off just like ya'all said they would. Removed and unplugged the module and started the search using ya'lls input on parts. Ordered and received today from Amazon a Standard Motor Products DS301T Turn Signal Switch. Looks exactly like the original. So here's hoping. Thank you greatly for the excellent technical support. BTW, the turn signal lever on this unit just pulls straight out. https://www.amazon.com/gp/product/B00471QQ9C/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Greg, Great photo! I didn’t see how to remove the covers with that solid plastic ring at the top. Assumed the wheel had to come off to get the plastic ring off to get the two cover halves off. Is there a not-so-obvious trick to getting the two cover halves off?

Update: I couldn’t get the steering wheel to break loose from the steering shaft, even using a wheel puller. So I soaked it with PB Blaster and put the nut back on. Coach is in for servicing now. Hopefully better luck when I get it back.

Paul, That must have started later than the date of my coach. Mine is definitely pre Navistar, thank goodness.

Rick and Greg, Excellent info! I will tear into it tomorrow. Intermittent -> pin connector -> logical. But if I need a new switch, $38.00 is MUCH better than over $200.00 some want.

Bill, I do have the parts list downloaded, but I was looking for clock spring, not knowing any better. Thanks for the info. Jim, Thank you.

2008 HR Ambassador 40SKQ, ISC360, RR8R, Not SmartWheel. First the turn signal lever on steering column wouldn’t stay engaged (up or down). I had to hold the lever up or down to keep the turn signal activated. Now both the left and right turn signals only occasionally indicate activation, based on the green arrow lights on the dash. I “assume” this is a clock spring issue. If I could be pointed in the right direction to find steering wheel/column disassembly and parts information, I will be very appreciative. Regards, Joe E. ’08 HR Amb

We had a Cricket for about three years. Worked great. Goes fast enough. Never any issues except when I towed it because we ran the batteries down. DON"T TOW A CRICKET!! It ruins the motor and motors are about $300. The Cricket fit in our Ford Edge. We had it insured. We sold it because we purchased electric bikes, and also wanted a full size golf cart for use in the neighborhood. Joe E 08 Amb

Here is a video on how its done. Links to parts in the description.

Salesman switch? Power seats are 12 volt. Joe Ego 08 Amb 40SKQ