Jump to content

lusgi

Members
  • Posts

    28
  • Joined

  • Last visited

Everything posted by lusgi

  1. Could be just frozen up. Try some lube and working it manually.
  2. I am wanting to tow a utility trailer behind my 1998 Monaco Windsor. After searching other threads it appears wiring for the brakes was started somewhere around 2004. I was curious if someone knew if there were wires run to the back for this purpose in the earlier models. Just looking for some info before I jump in looking for something that isn't there.
  3. I am on my third replacement. I paid for the first two and then I discovered that Dorman warranties them for 3 years. So i got a free replacement for the last one.
  4. For those doing the deep dive, you don't happen to have a good number for the replacement filters?
  5. I took my surge tank out long ago. Never looked back.
  6. after you dump, put five gallons of water in the tank and you are good to go.
  7. I am a little confused. I currently have the solid state isolator and an amp L start. I was thinking of adding the ML- ACR In case I needed to get an alternator on the road. Would not the amp L start and the DC-DC charger do the same thing?
  8. i have the same problem. Would you measure one of the filters you have out . Thank you
  9. Didn't see any mention of cause?
  10. Maybe run a scotch bright greeny on the armature to keep it nice and shiny
  11. Received my air throttle kit from Charles .It appears to be a very good quality and as advertised . My king control is still working So I will not be installing it right away So cannot comment on the installation .
  12. Received my air throttle kit from Charles . It appears well made and just as advertised . My king control is still working so at the moment I will not be installing it So cannot comment on the installation .
  13. I have been researching . it seems all the engines that are being worked on have the electric fuel pump . that's why I asked the question about a mechanical pump . does it make any difference?
  14. I have an 8.3 mechanical caps pump and mechanical lift pump . would I benefit from a Fass install ?
  15. take out the brushes and shine the armature up with scotch brite
  16. if i leave batteries for extended time i make sure they are fully charged and then disconnect them.
  17. do you have the part number for the filters that go in the reservoir, i believe there are 3. thanks, ken
  18. Front airbag for 1998 Windsor number W01 358 6905 I called Monaco and they were no help however they gave me the number for Beaver and they were able to locate part number. The number for beaver is 541-322-2184
  19. i need a part number for a front airbag for a 1998 windsor
×
×
  • Create New...