First I want to thank everyone for your input. Now I know a little more than I did before working on the generator. I received the new belt today and installed it right away. Checked everything real close then started it up. It started right away. Let it run for 15 minutes then put a good load on it and ran the genny for a half hour. It ran flawlessly. No error codes. So on to the next project (rebuild the air valves). Thanks everyone.
Don
Well I came back from our trip to buy a house in Kentucky. We found a nice house that meets our needs and negotiated a fair price and as soon as I sell my house in SWF we will move. Back to the subject. I took off the primary filter and it looked like there had been no fuel in it. I put some fuel in it and the water separator was leaking. I removed the water separator cleaned it, lubed the o ring, put it back together, filled it up with fuel and turned the key on to let the pump move fuel to the filters. After doing that 3 times with plenty of time between pump runs. It stated right up. Let it run for a awhile then shut it down. Waited a half hour then started right up again. Not sure why the fuel wasn't getting there because after the oil change it started up and ran for 10 to 15 minutes.
Thanks to all for all your info.