pwhittle
-
Posts
332 -
Joined
-
Last visited
-
Days Won
11
Community Answers
-
pwhittle's post in Signature 05 FARIA Front Air Gauge is erratic; low pressure flashing light. Need help and understanding was marked as the answer
To be clear, when I repair the gauges, I remove and re-install the bezel. You can see this has happened from the rear, but not when it is installed. I 3D printed a mount to protect the bezel. I posted the print on Monacoers.org for the DIY people with access to a 3D printer.
Paul
-
pwhittle's post in Aquahot 600 electric side wont heat was marked as the answer
I worked on another keypad today where the programming for one key position was not what it was supposed to be.
It is easy to fix once diagnosed, but something for us to keep in mind when troubleshooting.
Paul
-
pwhittle's post in Multiplex Light Switch Pad Failures Discussion was marked as the answer
Tom,
The dip switches are to set the address of the output module. Typically the module has a big round sticker with the label on it too.
In lieu of a wiring diagram of @FishAR’s coach, let’s get some pictures of what is there. A wide angle to show all the modules, then one of each module.
Paul