Ok hello again been doing a lot of research, and seen my post has been sidetracked, going in different directions.
This was my original issue, and yes i have many 😉 . As you can see in the picture (using Michelin as a example only)
275/70R22.5 LRJ X-multi-Z single 6940# @ 131 psi , Dual 6390# @ 131 psi, this should be a 18 ply tire
275/80R22.5 LRH X-Line Energy-Z Single 7160# @ 120 psi, Dual 6610# @ 120, this should be a 16 ply tire
My ACCURIDE rims state max 125 psi, and no i will never overload my rig, would i be better to go with a higher load at a lower psi (275/80) or going with a higher load rating (275/70) that i would not be able to because of the higher psi is more then rather Rims.
Again Thank You All.