Dude_from_Florida

I have a 2001 Diplomat with the ISB 300 Cummins and had this same issue around three years ago. On mine, the coating treatment intended to protect the inside of the fuel tank had peeled over time and clogged the fuel line that feeds the lift pump. This is an electric pump located just ahead of the high pressure injector pump (top passenger side of engine). Had to remove the fuel tank and sandblast the inside gaining access through the opening for the fuel gauge sensor and another opening on the bottom of the tank. The fuel lines to and from the rear engine and the lines to the generator on the front were also replaced. This was an interesting two week project. The fuel tank, once on the ground, would not clear coming out from underneath without lifting the coach.

I have a brand new Modine Radiator and Charge Air Cooler also with Transmission Cooler. Bought it for my 2001 Monaco Diplomat but never installed it. Tampa radiator shop was able to re-core the old ones. This is the entire assembly with frame and shroud. Specifics: Modine Radiator/Charger Air cooler total dimensions are 43 1/4" wide mount bracket to mount bracket on top Bottom measures 46 3/4" mount bracket to mount bracket. In the pictures there is a lip on the bottom actual radiator is 44" and 40 1/4 high top to bottom The whole assembly measures 13 1/2" wide with the shroud and set up for remote hook up. The Radiator and Charger Air Cooler is stacked with the Radiator on bottom. Dimensions of Intercooler: Cooling unit 34"wide, 19" tall and 3" thick. Overall 47"wide, 19"tall and 11 1/2"thick. The Charger Air Cooler has two ports one on either side intake ports are cast aluminum and measure 3 1/2" ID 4 1/8" OD. STEEL SHROUD (not plastic) is tapered to the front and measures 38" wide X 32" high in the front closest to the radiator and 34 1/2" wide X 30 1/2" high in the rear. Round hole for fan measures 31" in diameter and sticks out from the coils about 10" BRAND NEW MODINE COMBINATION RADIATOR AND CHARGE AIR COOLER WITH TRANSMISSION COOLER WITH STEEL SHROUD NEW STILL IN THE CRATE FOR DIESEL PUSHER CLASS A MONACO / HR MOTORHOME MODEL# 01807106-1A20309 WITH STEEL SHROUD I AM IN LAKELAND (Between Orlando and Tampa) PAID $2,500 - WILL TAKE $1,500 and WILL HELP SHIP OR DELIVER

The latch mechanism on my Diplomat is not the same as the one you describe. I apologize for any confusion I may have caused by my previous post.