Busnut
Members-
Posts
37 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Everything posted by Busnut
-
My front diagnostic plug in the drivers area doesn't work. 2003 Monaco Executive, I believe its because the wires from the plug are installed to the Trip tek. That does still work. I want to remove the wires and install them to a female black j1939 data link connector. Because I have a silver leaf that I would like to use.. The rear j1939 plugs works perfectly, but the front plug is a j1708 and does not work. I need a j1939. So taking the wires off the Trip tek I'll need to have some idea what is what. That is way I'm looking for an installation manual for the Trip tek 3100-x Thanks for your help
-
2016-2018 Lincoln MKX Roadmaster Base Plate
Busnut replied to Busnut's topic in For Sale: Parts, Components, & Accessories
New price$150.00 -
Is this what you are looking for? https://www.ebay.com/itm/266161386181?hash=item3df87472c5:g:YmsAAOSwr1ZjCZqL&amdata=enc%3AAQAIAAAA4MztOqfYV5LbkFmGx2re1toIZqcv5zMMdJ4h6c%2F8KpkIkavSTAT5HiwjSdlRQ0HLU4zN%2FTNK78SLPx8QuKOjC%2BvIWHb%2FWSOEWML0A7EVwsUUot7H3%2F9Uinm6Qwm5GIO53GtU3aHkh0IwD8j75WUj4itnTttSboacDS6m9aq%2F5kRw9v8y42x1VnIAgEd7882KKcSbJtVp5Pe13f%2BIfFYKdYF07sQkHssanwMle5AUPWIti0MHRxFvYQEoBD2D%2F2Jc5IRwU9Aa3FHjaW1pDROtHJO%2B90iwlSZQCkH4qJKiSJXX|tkp%3ABk9SR8bDjbSDYg
-
Hi Just bought this silver leaf for our motorhome 2003 Monaco with ISM cummins. Any members using one or information about recommending a good lap top or tablet that would be a good plug and play for the silver leaf. I was thinking around an 10 inch. Also a good mount . Thanks
-
MHRookie when you do find out let us know. I have the same front axle.
-
Thanks Ivan K
-
Thanks, I have something making a sound very fant sound (screeching sound) when my engine temperature is around 195 or higher. And the check gauges light comes on and off very fant as well. My engine does not go over 210 when going up a steep grade. What is the normal operating heat range for a 2003 ISM? Any ideas what to look for?
-
-
Scangauge D
Busnut replied to RBRODDER's topic in Engine, Transmission, Engine Cooling, & Hydraulics
My front one did the same thing. I plug in the rear and ran a 50 foot Ethernet cable to the drivers area and hook it to the scan D gauge. -
Looking for Body repair shop in SC
Busnut replied to nvrtoofast's topic in Body, Awning, Roof, Slides, & Steps
I have heard some good things from DC Custom 500 Hyder Road Inmam South Carolina 864 978-9754 http://dccustomsautopaint.com/ -
Looking for a Triptek 3000 Key/Entry Pad
Busnut replied to Bill C's topic in General Motorhome Discussion
Bill keep this post going . I'm thinking about going the same way you are. -
Alternator Charge Light
Busnut replied to Radar22's topic in Engine, Transmission, Engine Cooling, & Hydraulics
-
Alternator Charge Light
Busnut replied to Radar22's topic in Engine, Transmission, Engine Cooling, & Hydraulics
I never would of though it had anything to do with it. I was talking with pwhittle and he suggested changing it out. An wow it was fixed -
Alternator Charge Light
Busnut replied to Radar22's topic in Engine, Transmission, Engine Cooling, & Hydraulics
Just like this one. https://www.digikey.com/en/products/detail/triad-components-group/ACB-12-H-30A/11580705?utm_adgroup=Circuit Breakers&utm_source=google&utm_medium=cpc&utm_campaign=Shopping_Product_Circuit Protection_NEW&utm_term=&utm_content=Circuit Breakers&gclid=Cj0KCQiAlMCOBhCZARIsANLid6YF626UnkaGa7tjrlrl8258X1T3AyTahCBEegCsJvoKcQBK0zUmhOgaAuJ4EALw_wcB -
Alternator Charge Light
Busnut replied to Radar22's topic in Engine, Transmission, Engine Cooling, & Hydraulics
It was the driver side rear run panel. Mini breaker labeled VOLT REG 30 AMP -
Alternator Charge Light
Busnut replied to Radar22's topic in Engine, Transmission, Engine Cooling, & Hydraulics
I had the light come on after an alternator repair. I changed out the relay for the ALT light. I didn't have any luck with that. I changed out the circuit barker in the rear panel. That fixed the problem. -
Rvhydronics site with Roger Berke sells these. Mine was leaking around the base of the filler neck. I put one on mine. Fix my problem. I didn't even take the cover off. The bottom clamp is a shrink wrap hose clamp.
-
Radiator Needed
Busnut replied to Chargerman's topic in Engine, Transmission, Engine Cooling, & Hydraulics
You have a part number on your muffler? -
Radiator Needed
Busnut replied to Chargerman's topic in Engine, Transmission, Engine Cooling, & Hydraulics
Chargerman I'm following this because i'm going to be doing the same thing soon. I know i'll be needing the CAC. Plus looks like my transmission cooler is in the radiator. Hopefully later. I appreciate how detailed you have been with pictures and places where you have made you purchases for parts. Please keep us up to date -
I don't think it will help. But I will put it out here. I have a Scangauge D that did not work on the front plug. It did work on the rear plug just fine. After calling Scangauge D support. They told me I could return it. Or buy a 50 foot Ethernet cable and run it off the rear port. Being that one did work that is what I did. No problems works great.
-
Might want to rethink this. You won't be happy having to deal with the tow dolly. I did have a tow dolly this is the one I did have The KarKaddy SS folding one. When we bought the Yukon and started to flat tow. I'll never go back with a tow dolly. Just my 2 cents https://www.demco-products.com/rv-towing/tow-dollies/karkaddy3
-
2007 Signature "S" Chassis Welds Failed - Photos
Busnut replied to Hypoxia's topic in Chassis, Handling, Tires & Brakes
I have hear problems when having the Detroit engine as an option. I would think that the ISX is just as heavy. I have not seen or heard of any issue with the ISM. -
Directv east coast/west coast networks
Busnut replied to kenandjoanne2002's topic in Audio, Video, & Electronics
Great information. Please keep us informed. -
Thanks