Jump to content

James Selby

Members
  • Posts

    19
  • Joined

  • Last visited

Everything posted by James Selby

  1. Thank you!! I have one on the way now!!
  2. I have a 2006 Monaco Dynasty. 400 ISL. I need the part number for the A/C drier Thank you for your help James
  3. I damaged a door on mine. I bought a used door from Visone RV Parts Salvage. Door was roughly 1200.00 Had it painted and installed. It's the paint job that costs. Mines good as new. REV would make me a door for roughly 2500.00. My door was bent pretty bad. The labor to repair it was going to be as much or more than the used door.
  4. on mine it was a bad connection in a terminal in the connector on the back of the buttons. When that happened all the buttons stayed lit and nothing would worked till I remedied the issue.
  5. Visone RV Parts 243 Fields Ln East Berndadt, KY 40729 rvbodyparts@gmail.com (606)843-9889 they had boxes of various lighted handles when I was there February
  6. I have a button on my kitchen lighting panel to turn the hot water dispenser heat on/off. Look under the sink to see if it has a tank, roughly the size of a coffee can.
  7. if it's a Delta type faucet, there is a brass or plastic nut that screws down to hold the ball in place. It can be tightened a to put more friction on the ball. You can access it by removing the handle. You may wish to buy a repair kit. The kit will have a special wrench that has an allen on one side to remove the handle and a spanner wrench to tighten the nut.
  8. I’m sure it will mount up nicely!! If you have questions I’ll tell you what I did to mount mine.
  9. I'd have to measure and get back to you. Roughly 6" wide x 4" tall x 1/2" thick. It fit perfectly into the emblem indention on the front of my coach.
  10. Mines a 2006 Dynasty. It fit perfect I know the emblem is for a much later coach than mine. All I can say is order it.
  11. Mine’s mounted too!! Thank you for the part number!!
  12. my original emblem was attached with body molding tape (rubber tape with adhesive on both sides). I ordered a couple of new emblems from the Monaco parts site. One is to arrive this Friday. I'll see what I get. I'll share my experience. for drilling your holes. You may be able to make a template by using a copy machine to make a copy of the back of the emblem, if it's flat
  13. I ordered it and another one that was listed on the site. I'll see if it'll work. Thank you for your help!! it's Raptor rhino liner. I was hesitant when the body man suggested it. It looks great and is supposed to be tough tough tough!!
  14. I have a 2006 Dynasty. The diamond coat on the front was bad. I had a new coating put on. I need a new Monaco emblem for the front.
×
×
  • Create New...