Mark Ogier

I replaced all bay door latches on my 2003 Navigator with new, I have about 10 or so if you are interested, they are painted to match my bus, I'd sell for $20 each plus shipping

Thanks for everyone's help, I contacted HWH thru email and they responded very quick. My power supply board seems to be the problem, something shorted to ground.

Thanks Ivan K, I did pull the cable to touch pad and re-seat, granvillebarker, there are no LED's on any of the two boards in the control box. I will verify there is power on the cable going to the control box this evening, thank y'all for you help!

Hey granvillebarker, I can't find a reset switch or light, nothing in front run bay or where the control box is located, this is a 600 series system, any other ideas?

The fuse did not blow, wasn't aware of a reset switch and light, I'll check it out this evening, my control box is located in the top of the mid bay, that took awhile to find, Thanks

I have a 2003 Holiday Rambler, I have no power to the HWH touch pad, the travel light does illuminate. I found the control box and the 15 amp Battery fuse was blown, I replaced the fuse, but still no power on the touch pad, Park brake set and trans in neutral. Any help would be much appreciated as I called HWH and their tech support return call list is end of the year!