Keith Moffett

Daryl Just a heads up. We bought one 3 years ago at Laurelhurst distributing in Portland Or. They were the original supplier for Monaco and Beaver etc. Google them. Also I found a new Tecma low profile so I assume it comes with the computer and works with the sensors. It was on EBay for about $1000. I searched “Tecma Toilet”. Lastly ours quit and it was the computer. I replaced the computer but had a hunch it was the connector because the wiring ran into a pigtail then into the main plug. The pig tail split but went nowhere and I eliminated it so better connections. Later thought it may just have been that pigtail and bad contacts. Best of luck there.

Ours has the built in mascara too. The computer went out and it would not flush until 1AM and stopped again after 7AM. These toilets do some odd things. Try pulling the toilet and removing the computer plug then reconnecting. I understand the contacts get corroded.

I do like the set up the Steven shows and that is similar to VMSPC from Silverleaf.com . The VMSPC however is designed to replace the Aladdin. Something not mentioned is checking the source button on the Aladdin before jumping to expensive changes. I dont recall if it is the function button or the source button but cycling it will sometimes bring up the screen and full function. Also note that after rebooting the Aladdin we have had to recalibrate the holding tanks. Good luck

Did the brake sell?

A leaking hydraulic hose is bad especially one under pressure. I have seen burned coaches that started this way. A company called Pirteck of Tucson replaced ours.

Just my 2 cents Source Engineering treated us very well and knew about chassis elements I have been dealing with wrong elsewhere. These guys helped design these systems for Monaco. Yeah, I would listen to them.

Nice! Looks great!

Yup I believe so! You weren't there long as I recall. Yes we have an 07 PT Winchester 3. I know of 3 like ours.

Taking good care of the Valid pump is a good idea. Ours went bad after 10 years but has been replaced 3 times since. I have considered going to Canada just to replace the system.

Howdy fellow Beaver! Are you a BAC member? Hope so. Whats up with wheel balancers? We have had the beads in ours on other coaches. New tires on at purchase so no idea about balancers.

What coach is always helpful info. On our Beaver the compressor pumps up a tank just for that compressor and shuts off.

What shots?

You have the AHE 100 04s ? Just a guess!

Heatmyrv.com a good parts source. AquaHot.com /library for details on your model AH Remember on reinstalling the torque is 'inch pounds' not foot pounds.

Mike, we had a 1200 LRM Norcold and every time they did a recall things just got worse. These fridges are supposed to last about 10 years and if they go longer its icing on the cake. After seeing all the fires caused by RV fridges, especially Norcold its too much risk! We have an 07 Beaver with a Jenn Air residential fridge. It draws 13 amps. New fridges draw way less. Costco offers a Whirlpool and a Samsung that appear about comparable in size to the 1200LE but about half the price. Yes we have solar but not much. We do have a couple extra house batteries.