Bob Stevens

Mine was the solenoid. Jumped it. All better now.

1998 Windsor no slides no power to the bedroom fuse box Both batteries good. salesman switch is good Bad solenoid after salesman switch. I wired around it for now

No 12 volt lighting, bath fan, thermostat battery is good 12v+. Have power to ignition

Okay, I took it apart and cleaned the switch contacts and it seems to be working great. if you do this watch out tiny springs and the contacts are springy too. took me about 15-20 minutes total may have saved my sanity. i used alcohol to clean them.

Great I’ll give it a try

What kind of cost for the digital one? any rewireing? how much for the new old style one?

Is there any replacement for Duo Therm 4 button thermostat? mine is extremely hard to switch from zone 1 to zone 2. It bounces all over the place. It is a very poor design.

Thank you so much. Fixed all my lighting problems. Another thing off my list. 👍🏻

Great. I’m just outside of Orlando. Let me know when and I’ll meet you there. Which Ford’s? Orlando or Kissimmee

I could use 1 i live in fl

Found the problem. The right coil on the pump wasn’t working. thanks for trying to help.

I didn’t see a T handle, but I’ll look.

Right leveler will not go down. Left and front work fine but right is in the up position(thank God) and won’t budge. Hydraulics make a weird noise when we try to put the right down only. 1998 Monaco Windsor no slides 32’. i’ve tried “coaxing” it with a hammer in case it’s rusted. I also took off the springs and foot.

I have a 1998 Windsor I had to take out my instrument cluster and clean the back of the light bulbs to get a good connection. My RV sat for years prior to me buying it. It was a pain but I now have dash lights. They do come in handy.