planodp

@Greg G PM sent. Thanks Greg

Got 2 new one from Ebay. Thanks

Bill it's 630515.331C Penguin PROD # 991761219

Thanks Ben, just order 2 units. Look like you Ivan K and I are all neighbors. I now live in Trenton which is 20 miles east of Messila on SH121.

Going to replace both roof AC on 2004 Executive. I want to try to keep it simple using (KISS) method. LOL. These are the 3 units I was considering of using. All units 15 K with heat pump, Blizzard NXT, Penguin II and Brisk II. I'll also be replacing the 4 buttons thermostat with the new CCC 2. Right now, I'm leaning toward the Blizzard NXT for more air flow 350 CFM. Thanks in advance for the advice!

Thanks Ivan, just order2 I'll let you know if it fit or not.

Thanks for sharing the information, Ivan! After talking to you, I did discover that I had 3 low pressures switch 20 PSI and other leaks. Waiting for it to come in from HWH. In the means time started replacing the front air bags. The last 4 bags. The front has a 3/4 “air line with a 1 1/8 compression nut on it. What make ready bad is there is hardly any room on the back 2 bag. Ivan is this the plunger you are talking about? The silver piece in the middle. Would you have the part #? Thanks

Have anyone replace the HWH 2000 RP24986 Lexan. It is a stick-on type and wondering do you just clean the top off with rubbing alcohol or the old one have to be removed first. If so, is there a trick to get the old one off? Thank you

I agreed with the top bolt being the hardest to get off!! I went in on the top thur the bedroom access door. What work for me was using PB Blaster and just let it sit overnight. WOW the next morning it came out with ease. PB Blaster really work. I spent hours trying different thing that don't work.

Merry Christmas and a very Happy New Year 🛍️to all!

Guardian74, just passing information from our sister site https://www.irv2.com/forums/f258/rv-window-defogging-in-texas-481961.html

Basically, just rearranging (rerouting) the wires. The Denso starter is much smaller than Delco starter. I didn’t have to make or buy any cable. Got my from eBay for $160.21

Before you drive all the to Mesa, AZ you might want to call

I have been running the Denso Starter now for over 2 years with any issue. It spin my ISM like it was a law mower engine. This is the one I installed. I had to do a little bit of rewiring but use the cable from the Delco starter.