klcdenver
Members-
Posts
332 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Everything posted by klcdenver
-
Dometic Penguin ii replacement ac/hp
klcdenver replied to 63Hotrod's topic in AC, Heating, and Cooling
I replaced my front unit with the Recpro Houghton. I have ran it for 1 summer and 1 winter. It is much quieter than a penguin and the heat pump works down into the 28 degree range. Very easy to install also. -
Room needed to turn wheels hard left
klcdenver replied to Rgoodman's topic in Chassis, Handling, Tires & Brakes
Just pull or back out of building if you think you are going to hit. Then turn it all the way both directions. I did not jack my front end when I changed to the the TRW to set the poppet without any problem. -
Center brake light replacement
klcdenver replied to Just Jim's topic in Interior & Exterior Care & Renovations
Just measure the light and go to Amazon they have them. I bought one on Amazon several years ago and no problem so far. -
ISL 8.9L oil level
klcdenver replied to DennisZ's topic in Engine, Transmission, Engine Cooling, & Hydraulics
I wouldn’t worry about since you have driven it several thousand miles that way. I think you are suppose to check the oil level with the tube pushed in. It pulls out to make it easier to fill. -
Fleet School Oil and Lubricants
klcdenver replied to tmw188's topic in Engine, Transmission, Engine Cooling, & Hydraulics
Please post the time and date for the meeting -
Someone with a 3D Printer could possibly make it for you.
-
Cooling fan 2006 Diplomat
klcdenver replied to trstaska's topic in Engine, Transmission, Engine Cooling, & Hydraulics
You change it thru the bedroom floor. I sent you a PM with my number. Give me a call and I will explain it. -
Cooling fan 2006 Diplomat
klcdenver replied to trstaska's topic in Engine, Transmission, Engine Cooling, & Hydraulics
On my 2007 ISL 400 the fan is 30” and the shroud is 31”. -
Cooling fan 2006 Diplomat
klcdenver replied to trstaska's topic in Engine, Transmission, Engine Cooling, & Hydraulics
I can get measurements for you tomorrow from my 2007 Diplomat. If you call Source Engineering and talk to (Jim) if I remember the name correctly he knows exactly what you need. I just told him which motorhome I had and the fan he sent fit correctly. The hardest part is adjusting the shroud depth to fit in the middle of the new fan blades. I had to get a fan spacer and Jim knows that part number also. Just PM me if still want the measurements. -
Drift to the Right - 07 Sig
klcdenver replied to rpasetto's topic in Chassis, Handling, Tires & Brakes
Before you do anything check on the front axle to see if you have a steering stabilizer such as a safe-t-plus or roadmaster. If so it probably needs adjusted. It also does not take much of a crosswind to make that happen. -
Mixing Hydraulic fluids
klcdenver replied to Georgia Mike's topic in Engine, Transmission, Engine Cooling, & Hydraulics
You have misread the quantity it is only 3.5 quarts. I have been thru this when I changed my Sheppard steering box to a TRW. If it is not broke don't fix it just refill with 15w-40 and keep going, it appears it has been working for 18 years now. -
Mixing Hydraulic fluids
klcdenver replied to Georgia Mike's topic in Engine, Transmission, Engine Cooling, & Hydraulics
the 15w-40 is actually motor oil not ATF. -
Looks excellent
-
ENG COMM FAILURE - 2007 HR Imperial - HELP Fixing
klcdenver replied to Terrym's topic in Electrical Systems
Try disconnecting your batteries for a few minutes and see if it will reset. The fuses you are looking for should be in the battery bay if like a diplomat. -
HOW TO AVOID DAMAGE IN MH FROM FREEZING TEMPERATURES - HELP PLEASE
klcdenver replied to Jetjockey's topic in Water Systems
I have stayed in my diplomat with single digit temps. Make sure your propane is full because heat pumps are not going to work. Get a small electric heater about 450 watts and put in service bay. I use an extension chord from a source other than the motor home if possible. If not plug it into the receptacle where you plug in your block heater. If you will get 2-3 electric heaters for inside will help save on propane. I use the milk house heaters because they are all metal and the have overheat and tip over switches. If you put your slides in that also helps. Get you a roll of double bubble insulation and cut it to fit every window and the windshield. After placing them pull your shades down to hold in place. It is unreal how much the insulating the windshield makes. Put pillows or some foam in your over head vents also. Get some Velcro and use the insulation to cover your sky light in the bath. I have also used that same insulation and lined the cabinets that are in the slides. -
1996 Monaco Dynasty Model ?????
klcdenver commented on crazyinga's article in Bill D’s Monacoers History
Look on the inside door of the bath vanity cabinet and bedroom cabinet doors. You should find a info sheet with all the info on one of them. You can also send a email to Service.Requests@revrvgroup.com with serial number and vin number asking for build document. Happy New Year -
Upholstering suggestions for sofa air bed
klcdenver replied to RC2018's topic in Interior & Exterior Care & Renovations
I had mine done at a local upholstery shop. I took the components off my self and carried them into shop. Just unbolt from floor and pull it out. It comes apart pretty easy. I had good leather material and about 800 in it. -
2008 Diplomat Chasse batteries not charging.
klcdenver replied to David W's topic in Electrical Systems
The big boy should be on the back wall in the same bay as your batteries. You can remove it and disassembly it and clean it up. This will usually get them back working. -
You will need to adjust rear passenger side ride height valve to change drivers side. You will adjust the passenger rear to change the drivers side front. There is only one ride height valve in the front. It is connected to the center of the front axle.