Jump to content

tmw188

Members
 View Profile  See their activity

  • Posts

    865

  • Joined

  • Last visited

  • Days Won

    4

Community Answers

  1. tmw188
    tmw188's post in Fridge Fixer door lock was marked as the answer   
    So this is what I did for the freezer cabinet. Same thing I did for the other model I just modified some.


  2. tmw188
    tmw188's post in Water pump on light in bathrooms was marked as the answer   
    I’m assuming just the indicator light itself just needs replacing. Most all of mine were out at one time, just replace them. You can check them with a 12v test light first if you want. 
  3. tmw188
    tmw188's post in Any recommendations for Dash Air repair in central Florida? was marked as the answer   
    I would call Register RV Center in Brooksville look them up. I’ve been there just to look around but they would be capable and is close to you. Check their website. 
  4. tmw188
    tmw188's post in Transmission Cooler/Radiator TSI/TSB 124 was marked as the answer   
    I haven’t verified if it’s alum or not because at this point it’s shot. But I will stick a magnet up in there if I can reach it with a telescoping magnet on a stick. 
  5. tmw188
    tmw188's post in Can't find my engine serial number was marked as the answer   
    Yes up behind this area on the top right if I remember correctly. Looks like this


  6. tmw188
    tmw188's post in A/C Receiver Drier was marked as the answer   
    Try looking underneath just above the rear axle I believe it’s in that area.
  7. tmw188
    tmw188's post in Splendide 2000 WD802 Water Valves Stuck Open was marked as the answer   
    The new valves have std Hose threads. You will have to buy some fittings to convert your existing ones. You will need to get a Pex tool. If your lucky maybe they have already been replaced. Like I said verify with your existing valves for part. First three pics are of the old ones followed by the new ones. 







  8. tmw188
    tmw188's post in Light Switches and Bezels was marked as the answer   
    I found a few on their that will work as long as the footprint is the same which it probably is. 
  9. tmw188
    tmw188's post in Smart EMS Load Meter? was marked as the answer   
    Yep that’s what it was! The washer/dryer breaker I had off. I knew after reading all the suggestions that it had to be something like that because it never displayed while home before. Thanks for all the suggestions from you guys. Amazing how you start forgetting some things after being away a little while. We had a flood here over the summer and it was nonstop work for two mo. Fortunately I got my FASS Pump finished just weeks before all that. 

×
×
  • Create New...