Jump to content

HR Ambassador

Members
  • Posts

    6
  • Joined

  • Last visited

Required Information

  • FirstName
    John
  • Make
    Holiday Ramber
  • Model
    Ambassador
  • Year
    2009
  • City & State
    Independence MO

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

HR Ambassador's Achievements

2

Reputation

  1. I've used Blue Ox since 1995, and have never had a problem. American made from Nebraska. Highly recommend.
  2. I appreciate it very much. pajjrj@sbcglobal.net
  3. I'm not home either, so a week is not a big deal. How much do you need to email file?
  4. I own a 2009 HR Ambassador 41SKQ. I sure would like to get my hands on chassis wire drawings, and chassis air system drawings. Does anyone have these or know where to get them? I've contacted REV, no luck.
  5. I have a 2009 HR Ambassador 41 SKQ. Last winter while traveling to AZ., I got a Rear Tank Low Air warning and buzzer. We stopped in Amarilo, TX. and the repairman replaced the sending unit, located on the rear tank, and equalizer valve. Did not help. Since both tanks were holding 123 psi, we guessed not an air problem. After arriving in Mesa, I had a mobile repairman come by, and of course, everything worked perfectly. We assumed it was moisture in line partially frozen. So, I drained both tanks and replaced the moisture filter. Heading home, after about 50 miles, message and buzzer return. When pressure was above 65 psi buzzer and message would stop, then I could see the digital readout on message center. The front tank held at proper level, but rear would jump and fall so fast you couldn't read the numbers. Most of the way home it stayed above 65 psi, so no buzzer. After getting home I took it to a shop and was told I needed to replace the pressure sensor located in the generator compartment, which I did. Did not fix problem. I switched the wiring from the front to the rear sensor, just to see if the new sensor was bad, but the guage stayed the same, front ok, rear tank warning and buzzer. So, the next thought was the guage is bad. Replaces guage, did not help. I also replaced the park break pressure switch. I'm at a loss of what to do next, and ideas?
×
×
  • Create New...