Jump to content

JFitzloff

Members
  • Posts

    7
  • Joined

  • Last visited

Everything posted by JFitzloff

  1. The batteries are two years old. When they were new i install a watering system and I have my phone calendar set to remind me to check the water. They have taken one gallon in two years. I have not tested the batters with Hydrometer. I will check next weekend. The C-pap runs on the inverter. Yes I checked my connections first. This does not happen every night, only once in 11 nights most nights at bedtime i have 100% at 235-amp hours 12.8 volts and morning it is 75% at 176-amp hours 12.5 volts. When the Battery monitor alarms it is 0% o amp hours and 12 volts. Yes, I am all LED. I have a never cold refrigerator. I am in process of installing a power strip. my all off parasitic load reads at 3 amp @ 12 volts. I have not exercised the Batteries. I will do this!
  2. Yes I have four 6 volt batteries at 235 each for 470 ah total at 12 volts in a series parallel configuration which should give me 235 usable without damage to the batteries.
  3. We have 2005 Beaver Santaim 40 PDQ. I installed 1370 Watts (Four 335-Watt Panels) of Solar on the roof, 60 Amp MPPT Renology Charge controller, a 500-amp Renology battery monitor with the factor Magnum Sudo-Sine Wave inverter Charger. I operate the inverter at night to power my C-Pap. We just finished an eleven-day dry camping trip. My solar keeps us topped off really well. I had what appears (we were Sleeping) to be rapid discharge of our battery bank (four 235 ah 6-volt batteries) The last night there i was up at 1:00 am with the battery monitor reading 75% of 235 ah. At 2:30 am the battery monitor alarmed with zero capacity left. Needing the C-Pap I left the inverter and made it till morning. Ok now the question the only device in the system with large enough fuses and conductors to survive this type of discharge is the Magnum. I have been an electrician since 1974 and electrical inspector now. I cannot witness this as it happens at night. Have any of you had this type of issue?
  4. I got mine on Amizon! Lippert Components - 216567 Motorized Step Wet Bolt Replacement Kit for Coach Step `
  5. I am looking for the plastic handle for the drivers seat back tilt. The seat is a Flex Steel.
×
×
  • Create New...