Jump to content

gdroberson

Members
  • Posts

    111
  • Joined

  • Last visited

Everything posted by gdroberson

  1. you can probably use some hotmelt glue and glue something to it and pop it back out and then use some denatured alcohol to take the glue off
  2. yes 4x4 and thanks for the reply
  3. ok towed trailers for ever not tried flat towing I have a 2020 ford ranger and thinking of setting it up to tow but dont know what is a good setup thinking of picking up a used blue ox bx 4325 tow bar can get at a good price but dont know if it is a good tow bar or if I should look for something else that would be better dont have a clue of what I need so any suggestions' would appreciated thanks Gary
  4. the hose goes from that fitting to the tank when it gets to the tank there should be a shout off valve
  5. yes had the same thing happen to me the hose dry rots and when they put the pressure on it to fill it leaks through a thousand pen holesI went to the hose man and had a new one made ther should be a valve on the tank that you can shout it off and remove the old hose and take it with you
  6. can you unhook the linkage from the latch so you can get more movement out of it
  7. have someone hit the slide switch while you keep the meter on the out put side of the solenoid and see if the volts stay could be bad contacts in the solenoid
  8. I just took some needle nose pliers and tore it out there is a 1 in hole through the fiberglass the lights are put on last
  9. I removed that black r5ubber part and there was longer wire behind it
  10. he used th wrong glue you have to use the glue that is made for solid surface
  11. go to firestone and match up the sizes with theres not hard that is what i did worked out OK
  12. i made a wrench out of a old socket i need to find it i put it where i would not loos it you know how that goes and if you send me a no. i will send you some pic of it there is a video of it if you google it
  13. you have to make the wrench it is night now but tomorrow i can show you how
  14. the worst part and the best part is i spent a 130. on a wiring diagram that is only partial to my coach
  15. OK put a big stupid stamp on my forhead when i was unplugging from the old panel and plugging in the new one it was upside down so i put the alt light where the abs light went and the abs in the alt spot so it is the abs light that is on so it should reset when i drive it
  16. you can get these at home depot or on line just make that they are the same overlay 1/2" or what ever they hang over the face frame
  17. I can not find a relay that is six volt I will figure it out when I get the wiring diagram thanks dont have this relay that I can find thanks
  18. will kook for it in the morning and thanks again
  19. thanks for the info I figured it is a relay but have no idea where or what it looks like I ordered a wiring diagram to try to find it the bad thing is the bad thing is the 30 foot diesel does not have any pacific drawings it is close to the 32=34 foot Monaco
×
×
  • Create New...