JetAburner

I had the same issue. Service check code 3 (blinks). It was a bad water temp sending unit. Remove the top panel and you'll see it threaded into the rear left top of the head. Kinda tight to get to, but not bad. I was able to knock it loose with a standard combination wrench.

Check to see if you have a converter (if needed) to convert from euro style (coach) to combined (toad). If so, check it's function. I had one that failed. Next, my coach has a terminal block in the rear elect bay that takes one taillight wire and splits it. One to the coach, and one to the trailer plug, via the converter. The same thing for brake, and turn. When I bought my coach, it had a right hand brake and turn signal prob on the coach. Turned out it was missing the second wire from the split to the plug and they just tied into the the brake light wire in the plug. Removed that mess and added the second wire, problem solved. Hope this helps.

Good to know, thanks. We just recently dumped ATT and now our 5g phones and the T mobile wireless work great. None of them work perfect everywhere, but will definetly give it a try on the road.

I'm running Toyo 295/80s on my Windsor and love em. Yes, at highway speed the speedo reads slow, approx 5 to 7 mph, but I like how they drive and the higher weight rating. My nav GPS gives my exact speed. I didn't have a problem getting them, but then I used my old big rig tire shop. You should have better luck at a truck tire dealer.

Yes, I just looked into switching out my thermo. Looks like good reviews and I love the features. Bluetooth, phone app to remote control it, etc. Would have ordered one yesterday. Problem is, I have the FOUR button thermo, and according to Easy Touch, I would also need to change out my AC control unit/units at $180.00 each as well. Think I'll wait.

I'm running 295 Toyos with no issues. And 295s have a higher weight rating. They look better too.

I like to manually shift keeping it between 1500-2000. I know that the ISC hits peak torque at 1200, and the book says you can WOT down to 1200, but after years of trucking, I don't like to pull em that low. On the other hand, the ISC doesn't like to twist high either. After 2000 your pretty much out of the torque range. Just my 2cents.

Thanks for the heads up. Perfect timing. Bought one to replace my old one.

This might work better.IMG_1705.zip

Hello Mike OK, I'm back from the dead. Sorry for the delay. I took an HD pic of my front run bay schematic so hopefully you'll be able to make out the details. Let me know if it works for you. Best regards Keith

Mine's the propane bay.

Hi Mike, sorry for the delay. Haven't forgotten about you. I'm in the middle of a few things right now, but I will be going down to the coach to do a couple things next week. I want to take my 35mm camera to get a REAL hi rez photo to put in my laptop then make a file to send you. Unless you want to meet me there to take a look at it. Either way works for me.

Dang it. If your not needing it right away, I'll get out my 35mm digital camera, shoot it, make a file in my computer and send it to your email if you like. It's no problem. FYI, I see your in Rocklin Ca. We're in Orangevale Ca