bsss57

Yes they are very good, I had my coach serviced by them a few years ago. 1st class all the way.

I thought I'd give a update on my seal problem. I went and got some flex glue cleaned the surface and applied it to the slide frame and brought the slide in. It's been a year and the gasket hasn't moved. Happy with the results.

Working for me. I get duplicate e-mail. I was going to unsubscribe, but was afraid it might unsubscribe me all together.

2005 Diplomat I have a problem keeping the 5/8" wide gasket attached where the slide outs. At least once a year I have to clean the gasket surface and re-glue the gaskets. When new, the gasket comes with a double sided tape the holds it in place, but after a short time it comes loose or moves out of place. I have been using 3m adhesive spray, but this doesn't keep it stationary either. Does anyone else have this problem, and if you did how did you fix it? Couldn't get the pictures to rotate.

It's rack and pinion The batteries are new last year and all of the other slides work fine. I'm thinking the motor is weak, just hoping not to have to pay the $300 plus if it was a roller aliment problem.

Let me make a correction there is no ramp. It just appears to be one the way the slide tilt when it's coming in.

The kitchen slide won't close on my 2005 diplomat. The slide work fine opening but when I close the slide it will only close until it gets near the top of the ramp. In order to get up to the top of the ramp I have to pull on the counter top while my dw holds the switch. then it'll close rest of the way I've taken the motor and had it checked twice, both time I was told the motor worked fine under a load. The rollers turns good and no flat spots, floor is good. So my question is do the rollers need adjusted to get it up the ramp? if so, is there method?