Jump to content

Jdw12345

Members
  • Posts

    410
  • Joined

  • Last visited

  • Days Won

    3

Jdw12345 last won the day on July 2 2023

Jdw12345 had the most liked content!

Required Information

  • FirstName
    Jeff
  • Make
    Monaco
  • Model
    Dynasty
  • Year
    2005
  • City & State
    Minnesota

Recent Profile Visitors

508 profile views

Jdw12345's Achievements

172

Reputation

2

Community Answers

  1. The picture you posted indicates that the air line is leaking, I can only assume that is why you are asking about the air ride valve, you might be able to remove that leaking air line and reinsert it if it still leaks make a clean cut, no burs, and re-insert the air line, hopefully that there is enough extra air line to try this, I’ve noticed on some of my air lines that they cut them off just a hair short. If you’re wanting a new air ride valve you should be able to get one at any heavy duty truck parts store.
  2. Looks to me like the drag link has been replaced so it’s probably a different design, notice the drag like isn’t panted like everything around it, doesn’t answer your question but it’s hard to know if it’s been replaced with a sub standard part. Jmo.
  3. I installed a new muffler on my 05 a couple of years ago, I would think that your 03 is similar, the Walker 22552 was a replacement for my stock muffler using the oem tail pipe that existed on the right hand side, I purchased it from Amazon, it shows it currently unavailable but any Walker dealer should be able to order one, I used all the existing muffler hanger brackets and straps. If I remember correctly it measured 10” across and around 26 or 28” long, it was oblong in shape, And it didn’t appear to have much for restriction, just some baffling, the oem muffler I removed had much more internal baffling. update, here’s a link to the muffler I used, https://www.walkerexhaust.com/find-my-part/part-details.html?part_number=22552&brand_code=BDCN
  4. At that rate it shouldn’t be too hard to figure out where it coming from, imo.
  5. For those that may have not seen this, purely for information https://www.michelinb2b.com/wps/b2bcontent/PDF/RV_Tires_Brochure.pdf
  6. It will be interesting to hear your report about the new tires!
  7. So you must carry a generous supply of spare parts to cover the air leveling system also then?
  8. Sorry to hear about your troubles deanrd! Thanks for the response deandrd & 96EVO, curious to know what mileage you are at? Assuming you have an ISL…
  9. If I’m hooked to shore power and I’m leaving in the morning and it’s chilly out, I just use the block heater. I have used the block heater and the AH engine heater at the same time if I’m ahead of schedule and want to warm it up a bit quicker. Jmo. In regards to lifting your coach up for maintenance, I built a set of ramps out of 2x10’s to drive the coach up on, best thing I ever did for working underneath the ole girl! I built 6 ramps and lift the tag axle then when it’s up there I just use square blocks under the tag and drop it down to equalize the load on the chassis when it’s up on the ramps, obviously if you have to get in somewhere where the body could come down on you and trap you it should be blocked/ supported in some fashion. I don’t remember who suggested that idea but excellent idea! It’s a bit unnerving the first time you drive up on the ramps, it takes a bit of power but if you control the movement with the brakes instead of the throttle it’s pretty easy, just don’t drive off the end!!! I’ve spent most of my life rolling around under trucks with a bit more room so this was an excellent idea to make more room under the coach, and if the air suspension should fail while you’re under it, you should have enough room to get out!
  10. deanrd just curious how things are going? Me friend is considering getting a coach with the DPF on it and we are just educating ourselves on these types of issues.. Thanks
  11. One thing to look at is wheel seals too, if you’re not familiar with them you have to look at them from the brake side of the hubs, if you happen to have a wheel seal leaking also it’s possible that it’s indicating an issue with the differential, thrust washers, bearings, ect. Just something to stick in your head, it unlikely to have two seals leaking at the same time, metal fragments floating around in the lube will cause multiple or reoccurring seal issues. Just something to know.
  12. Plug n play on my 05 Monaco Dynasty, other than the new pigtail. I even had the relays on my bench for the fix. I called IMMI and ordered direct, like $380.00 plus shipping. I asked myself, really, $400.00, it was a no brainer for me. JMO. I think I waited for a couple of weeks for delivery. NW RV has them in stock right now I believe.
  13. Personally I think it’s the only way to go, I’m not convinced that fixing a known problem and not fixing the cause has any value. It’s like putting air in a tire that has a hole in it and not plugging the whole. Jmo.
  14. FWIW I replaced my problematic SM 209 with a brand new one from VIP, the replacement is the SM210, maybe you already know this, at any rate the SM210 is more robust, I also purchased and replaced a new end to wiring harness that plugs into the controller. All working well now and no heated wiring harness any longer.
  15. We purchased our coach a few years ago, the previous owner had to replace the front unit a few months before we purchased the coach, the new unit seems to make more cool air than the old unit, I have no idea what the hours are on the rear unit but it certainly doesn’t perform as well as the new one up front. I wouldn’t spend my money or time on replacing old units with old units if you plan on keeping the coach, just my opinion.
×
×
  • Create New...