Jump to content

bbralph

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by bbralph

  1. Thank you for all of the replies and comments, and a special thank you to Frank McElroy for the phone call to explain the likely causes of my issue to me! This forum is a great source of information and knowledge. I would definitely be lost without it. Updates to come!
  2. Ivylog, Is the M&M in Deland the same as the shop in Ohio, and are they open in that location year round?
  3. The tech is not knowledgeable with the multiplex system. We are just trying to get the headlights working, so I can take it to another location if necessary. He has removed the headlight switch module and found that someone in the past had soldered the wires directly to the switch. We have a new switch, but we do not have a replacement connecter. Do any of you know which connector it is that we need to connect the wires to the new switch?
  4. The tech is now looking for the Eaton Master Module for the headlights? Does anyone know where that might be?
  5. I had to replace the entry step on my 2009 Dynasty and was able to find a huge selection on Lippert components. https://www.lci1.com
  6. Everyone, Thank you for taking the time to read this post. I am new to this forum today. I was advised to post on this site for help finding the diagrams needed. I have a 2009 Monaco Dynasty Nottingham IV. One of my headlights was not working, so I took it to a local RV dealership to have them check it out. They took it to a local chassis shop to have the headlight fixed. When it came out of that shop, nothing worked...no headlights, running lights or tail lights. They took it back to that shop to have them fix what they messed up. After a couple of days, that shop said they didn't know what they did to cause everything to quit working and we were on our own to figure it out. The RV repair shop then took it to another chassis shop, Florida Detroit Diesel in Panama City. This shop is willing to work on the coach, but they are in need of the wiring diagrams to trace down the wiring. Apparently, wires were cut and spliced under the front, and they want to make sure wires are connected correctly. If anyone has these diagrams, it would be greatly appreciated. Thank You.
×
×
  • Create New...