HJK2005

Our Dynasty already had one in the bedroom. I could probably pull it down and take/post pictures of the mounting. If anyone is interested? Not 100% that it's factory but rather looks like it was. - Jonathan

Just adding to this information a bit, no pun intended, the bits are generally a square #2 or SQ2 on the bit itself. Sometimes you will find a screw that is an SQ1 but they are much more rare. Hopefully this helps someone at least a bit. Kreg and several others make a 6" SQ2 that make getting to the valance brackets much easier. Take care out there.

Hello Don, that is a 1/2" check valve. You have one for each zone of the Aqua Hot. They turn blue/green like that when there is a leak that allows the boiler liquid to get on the outside of the valve. You can Google "1/2" brass check valve" and there are various sources for them. Here is one link for Lowe's: https://www.lowes.com/pd/AMERICAN-VALVE-Check-Valve-Brass-1-2-in-Fnpt-Swing-Check-Valve/1000248917?cm_mmc=shp-_-c-_-prd-_-plb-_-ggl-_-LIA_PLB_142_Pipe-Fittings-_-1000248917-_-local-_-0-_-0&ds_rl=1286981&gclid=CjwKCAiA5Y6eBhAbEiwA_2ZWIYMQpNnTMIHRPQPGGxqzC_VzUZ0sDJJ7lktNoNxPilhPmXMjZZn41RoCGzIQAvD_BwE&gclsrc=aw.ds Hope this helps. Feel free to reach me directly if you have any questions. I just did a complete once over on our Aqua Hot. Happy RVing. - Jonathan

Hello Bill, I also have the Starlink RV system and I used this gland to come through the front cap on the old cell phone antenna plate area. A little bit of Dicor type sealant under to ensure a good seal and it's very clean. This is designed for boat decks and hulls. https://smile.amazon.com/gp/aw/d/B079Q7XYXN?psc=1&ref=ppx_pop_mob_b_asin_title There are many options but this was the "cleanest" way I came up with. Hope whatever you decide on works out well for you. - Jonathan