Ted Carbonaro

Auto Glass Boss was at our group of Monaco’s at Quartzite today. He did four windows on two coach’s in our group today. They came out great! I’m having him do mine back in Mesa when we return.

My ladder is full length and it cost $365.00 plus shipping. That was in July 2023. The original was chrome, the replacement is grey; otherwise it's identical to the original. It was a complete kit with all mounting braces and hardware.

I just recently purchased a new ladder from REV in Oregon. It was an exact match for our 2006 Camelot. and reasonably priced.

Love my custom tuned Source-Bilstein’s installed in our Camelot August 2022.

I’m definitely in need of that sweep material. Have been searching for it unsuccessfully so far. If you would mail it to; Ted Carbonaro, 14411 SE 89th Place, Newcastle, WA 98059-3303 I’d be happy to Venmo you some $$ thanks Ted C

Mine was operating perfectly when I removed it. It went straight into the trash!

I’m interested in the 2 baby moon covers. Where are you shipping from? thanks, ted

Can you hear the propane furnace fire up when you switch it on 12 volt? If not It could also be the control module.

Thanks for the feedback!

My Power Gear Power Level system is malfunctioning. The Auto Leveling has stopped working. Which by itself would not bother my too much. But as a result the warning alarm and all lights flashing on the control panel are particularly annoying while traveling. Manual mode seems to work fine for leveling. I have check fluid and checked all electrical connections at the pump and reservoir. Has anyone had this problem and come up with the solution? Photo attached. 06 Camelot

I’m running the Peak Final Charge Pro Series 50/50. Meets Cummins, Isuzu & Komatsu specs. #0130-7903 is the 16 lbs cap.

I haven’t opened the package yet, but I looked through the bag and I’m pretty sure it’s a 16 lb. I’m planning to do it tomorrow and I’ll let you know what Cummins gave me.

A typo it is. 1060 hours on it now. Just leaving Cummins with thermostat, gasket and coolant cap in hand. $62.12 + tax.

Bill thanks for the video! It was very helpful! Like you said, straight forward but really good to watch someone else do it first. And thanks for the tip on the thermostat, I’ll definitely change it as well. Thanks! Ted

Getting ready to flush and change coolant in my Onan Diesel 8000 HDKAK Manual says to use same coolant as my ISL400, 4.2 qts. Flush & change at 1000 hours or every 2 years. I’m just over 10000 hours, so ready to flush and refill. Looking for any tips, suggestions, DO’s or DON’Ts.