Russ R

If you open the awning fully. There should be a tag on the roller tube. It will have the serial number on it. Then you can call Carefree and get all the information you need. From what I have been told is that the difference is the spring. Omega II has a left side spring and the Omega has a right hand. standing in front of and looking at the awning.

Are your slides Power Gear or LCI?

There are many different ones. You need the model of the slide. If you have a Power Gear slide, attached is a picture of what to look for. So more information is needed to figure out which one you need.

I am not sure about yours, but some are 21- tooth. https://arcorpidaho.com/product-tag/368967?fbclid=IwAR1Tjg0LDMGSbdyJhucItSKJtNw62RWdWzN9LbAUbyC56mhN_F1OiEddSfw

Mine did this before and it turned out the Fuel Filter needed to be changed. Once the filter was changed it worked fine.

Get the Norcold Service Manual from the files section of this site and run the troubleshooting.

Thank you for the heads up. My 750 has already been upgraded in 2009. It's a 750 EMS with the 760 Boards and display. Russ

Thank you Jim.

Good evening. 2003 Windsor. Need to replace the circuit board on my Intellitec 750 EMS. Before I go to the usuals, (yes I know M&M and all the other distributors). I was wondering if @pwhittle or @Frank McElroy had an extra for sale. Just trying to keep our parts in group if possible. Let me say AGAIN I don't need suggestions on troubleshooting or someplace to send mine for repair, unless Paul, Frank or someone within this group wants and has the capability to repair it. If so, you can message me. Thank You Russ

There should be a serial number on the awnings somewhere. All of mine (a 2003) have serial numbers. Most are on the inner part of the covers. If you can find the serial numbers Carefree can tell you everything about the awning, including the original material color.

Martinvz gave great directions. You can PM him by clicking on his large initial (at the top left of his answer) then click on the message at the top.

Your ABS/ATC light should come on at start up and shut off when you reach air pressure and step on the brake.

On my 2003 Windsor, it is because of the ABS/ATC Board located in the FRB. It is no longer available. I have been told that it can be sent to KIB and be repaired. It looks like the picture that I attached. I have removed it and cleaned it and it works for a couple of months. Then it comes back on.

Love my MicroAir Thermostat. Best upgrade ever.

I believe that this is what you need to re-attach it. https://vipih.com/products/rv-ladder-repair-kit-nuts-stainless-bunk-motorhome-parts-camper-trailer-coach?currency=USD&variant=37197711442085&utm_medium=cpc&utm_source=google&utm_campaign=Google Shopping&stkn=6a6d9b3e549d&gad_source=1&gclid=Cj0KCQiAr8eqBhD3ARIsAIe-buM7mEyFf6N7LnDVdM1qk8slFWhC_s6Ix4GI1R0eff4DqVWwuYuMYIcaAphHEALw_wcB