Jump to content

Squints2c

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by Squints2c

  1. When my 2006 Cayman was towed they folded the mirrors in toward the windshield. Ive loosened the bolts but cant get them fold back to the normal position. Is there a trick to it? I have tried the adjustment switch, and the glass moves but that is all that it does.Unfold
  2. I found my water temp alarm. Mine was capped off, way up in the wire loom. It looks factory.
  3. Right behind the leveler is where the tank vent is. If it's that it should quit after you use some out of the tank. If I recall correctly it's about a 1 inch rubber hose.
  4. Thanks so much for your time, I havent located the water temp alarm yet but there is a bundle on the pass side of the motor that I have looked at yet. That will be my Saturday project after I get the valve cover back on and new turbo plumbing installed.
  5. Excuse the mess, I'm putting new valve cover gaskets on. It's between cylinders 2 and 3. I peeled back the loom and it says water temp sensor but there was only the one wire hooked up and there is two spade terminals on the sensor. If you can tell me if yours has two and what the other wire is, I would appreciate it. Also the other two wires say "oil pressure" and "oil pressure alarm" I'm not sure where they go. Thanks for the help. Thanks for the tip, I really appreciate it. I peeled them back and they are all labeled. I have never seen that in any vehicle I've ever worked on. Thanks Cummins. The three are Water temp, oil pressure and oil pressure alarm.
  6. I bought a running, driving 2006 Monaco Cayman with the 5.9 Cummins for a great deal. Im going through the drive train now and have a sensor that I cant identify. It looks like a water temp sensor but I cant be sure. Its located between the EGR cooler and the valve cover and threads down in the head. It has two spade connectors going to it but only one wire was hooked up when I got it and when I touched it the terminal just fell apart due to corrosion. There are three wires that come across from the pass side of the motor that are not hooked up and have no connectors on them, all white in color but each in a separate wire loom. Can anyone tell me what the sensor is and which wire/wires get hooked to it. I can add a picture if needed.
×
×
  • Create New...