Jump to content

Lenny D

Members
  • Posts

    41
  • Joined

  • Last visited

Required Information

  • FirstName
    Leonard
  • Make
    Monaco
  • Model
    Windsor 40PBT
  • Year
    2002
  • City & State
    Bridgewater

Optional Information

  • Full Address (Optional)
    153 sycamore Ave, Bridgewater , New Jersey, 08807
  • Brief Bio (Optional)
    Destination unknown

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Lenny D's Achievements

8

Reputation

  1. Hello. 2002 Windsor. I'm having an issue with my Xantrex RC7/GS remote for the TRACE ENGINEERING converter/inverter. It just started giving me some confusing readouts. As it is right now it is showing the BATT. FULL light green/on steady. The CHARGE light is flashing rapidly. The readout is alternating between FLOAT and EQUALIZING. It also is emitting a rapid clicking sound with a short beep. I've done some process of elimination. I've unplugged the data line at the inverter and left it unplugged overnight. No change when plugged back in. I unplugged the data line at the remote as well. No change when plugged back in. I've shut off the 50amp service coming in and the remote shows INVERTING and all the 12v is working. I started the generator while the 50amp was still off .. The remote returns to the same state as listed above and all systems are working. The LED status light on the inverter is flashing green as it always has showing that batteries are fully charged and in float. I also removed, cleaned and applied protectant to all battery terminals. Batteries are less than 2 years old. In summary, everything electrical seems to be working as it should. I'm thinking two things. Data cable might be compromised somewhere between the inverter and the remote. OR The remote has failed and needs to be replaced. My next move will be to purchase 100' of compatible data cable and run it out side the coach from the inverter to the remote and see if that fixes the issue. Then I'll know its the cable. If not, I'm considering buying a new remote (I don't think Xantrex makes the same remote anymore but most likely has a compatible replacement. I'm on hold with Xantrex as I type). ALSO PLEASE NOTE the auto gen start stopped working about 18 months ago. I haven't had it looked at as we do not do a lot of boondocking (yet) Any suggestions are very welcome. I'm only 2 years into this so I'm still wet behind the ears here. TYIA LD Z
  2. Richard answered the question about the white smoke. It is excess diesel fuel from the the times it failed to ignite the burner. I had the same problem with mine. My issue was a bad control board. Easy to replace. Plug and play. But the boxes themselves are not cheap. Used or rebuilt 1st generation is about $400-$500 .. New 4th generation is $800+
  3. On the road again Ray ... May you rest in everlasting peace.
  4. The diesel side does not use that much fuel. I've had my AH running (both electric and diesel) since the end of September 23' .. I had a full tank of fuel when I parked in March 23' .. (02 Windsor - 40') .. I start my motor once a month. Since I started using my AH I've used up maybe 1/8 of a tank. I'm parked in New Jersey. With that said, for 1 month (October) my control board failed and I lost the diesel side so In was running just in the electric. No way it could keep up with the temp drops .. I was also using the heat pumps on my Penguin II roof units to supplement but they stop working when the temps drop below 30 degrees .. We also used electric space heaters to compensate when needed (I found the oil heaters to work the best) .. Once the diesel side was repaired we had good heat but I noticed the hot water was running out too quickly. I had the tech come back and he was going to replace a thermostat inside the AH unit as well as the tempering valve .. Thats when I noticed I was getting a steady drip under the coach from the AH unit. ended up ascertaining that the tank inside the AH was leaking from most likely the copper tubing. My unit is older. The copper tube is on the outside of the tank .. All the research I did showed other AH owners with the same model as mine, I have a model 431/12 which is identical to the original 100-01/02 that was replaced by the previous owner, were showing leaking from corrosion where the clips that hold the tubing to the take oxidize and eventually compromise the copper. . . So, I cancelled the thermostat and tempering valve replacement and now am waiting for a rebuilt tank to be shipped and installed .. We had to rob a bank to pay for the parts and labor but such is the life we chose and love. AH's are fantastic ... when they are working. . Some friends think it might be time to sell .. I disagree. If I still had a stick and brick I certainly wouldn't sell if my furnace or hot water heater went down. I believe once you start using your diesel and electric together you'll be nice and toasty. We keep our thermostat at 71 degrees .. I like it warmer, at 72* and the wife likes it cooler 70* .. The age old husband / wife cage match .. lol. . Best of luck getting to the bottom of your AH issues and safe travels. LD (The Breeze) 2002 Monaco Windsor 40PBT
  5. I am the buyer of Dr4Film's (Richard) 2002 Windsor .. The Aqua-Hot Model in the Windsor is model 431/12 which is identical to the 100-01 and 100-02. The original Aqua-Hot was a 100-01.. I seem to have spung a leak somewhere inside the box. No visible leaking when service hood is removed. There is a steady drip under the coach mid-ship below the Aqua Hot. Looks as though its coming through where the exhaust comes through. . I've had two separate techs here (New Jersey) to work on it ... It started out simple enough where I had to replace the control module .. I ended up ordering a new 4th generation box at a hefty price tag of $950.oo .. He put it in and it worked for a day then started doing the same thing as the one that was replaced was doing. It would spin up the motor but not ignite the burner.... I then purchased a rebuilt, 1st generation (silver metal box from the gentleman in Texas whose name escapes me) .. When the tech returned he pulled the new box and installed the rebuilt one. He also put in a new high limit switch .. Since the rebuilt box has been in it's been doing its job. He took the new one back and tested it, he also spoke to Aqua Hot (who would not take a return) and it was determined that nothing is wrong with the new box (it is now for sale btw). Now I'm dealing with the leak issue. I have to have the unit removed for a look see under the hood. Most likely its the cooper coil .. Unfortunately my current health does not allow me to any of this work myself. We have plenty of heat and we have enough hot water (although it runs out quickly) a separate issue. My immediate concerns are 1) I will need to get my unit either replaced or repaired. My wife and I are full timers currently mooch docking at my daughters house in New Jersey where we spent our summer. We were supposed to be in Fla now but an unforeseen health issue is keeping us here for a good part of the winter. So to have the unit pulled would leave us with no heat and no hot water for an undetermined amount of time .. I thought about heading to Fla in Feb after my treatments are done but that brings me to concern #2) The floor under the AH has been taking on this water for what looks like some time. It shows signs of deterioration.(see photos).. I'd be afraid that one good pothole and the unit would fall right out. SO ... here we are. The tech that is qualified to remove the unit is waiting for John C to get back to us. I'd either buy a refurb or find out the turn around time to send mine in for a rebuild. That would of course leave us without heat and hot water in the middle of a Northeastern winter.... There are ways around everything. We could get a extended stay room close by while we wait for the repair but now we're circling the 12k to 15k price tag .. We do not want to sell. Aside from the AH issue this coach is amazing. Richard took very good care of her and she's had some nice upgrades, and she runs and rides like a Caddy. Sorry, I guess I'm just venting but maybe I can get a few suggestions that I can add to my list of options..
  6. 2002 Monaco WIndsor ..... We use the Garmin 770 as well but we never depend on just the Garmin. We also use Waze and Google. Waze will show road closures and traffic %90 of the time. Google is helpful when I use the satellite or street view during pre planning. I like to see what certain intersections or terrain look like ahead of time... But the Garmin has my coach values programed in. Like you Richard, I sometimes have to enter way points to attain a desired route. I was also using an app called "RV Life" . I used that app in conjunction with the Garmin the very first time we traveled from NJ to Fla. It was our first time out and I like to have options. It worked well. That app has a cost of $19.99 a month or $65 a year... It was definitely helpful but once I got the hang of using the Garmin, Waze and Google I canceled that membership after the first month. Fingers crossed, Garmin has not led me down any dirt roads just yet .. I'm wondering, when entering route options into the Garmin, you have the choice of Fastest or Shortest. Would either setting be less apt to take us off the beaten path and into 40' x 12' hell ? Keep the rubber side down ladies and gents. Safe travels. LD
  7. Hello .. I have the 02' Windsor "Dr Film" mentioned .. My front AC has been giving me problems for about 4 months now. It will start up intermittently. When it does, the fan starts up then the compressor kicks on .. It will run on all speeds for about 15 minutes. Then, as I sit I hear the fan motor begin to get slower and slower till it finally stops. I can still hear the compressor humming so I shut it down. It will not restart at this point. We tried changing the capacitor but to no avail. My next move is getting a new fan motor. At which time I will also switch out the two capacitors ... I'm currently in NJ and the AC isn't being used as our temps are dropping weekly. We leave for Florida last week in November. I'll have it fixed in Fla. Getting a mobile tech in Jersey is like finding a needle in a haystack. You're problem sounds like what was mentioned. Low Freon ... These Penguin II's are great units. I'd get a meter on the capacitor which may be losing its ability to hold a charge. Good luck .. We turned our rear unit on and used a fan to help blow air up front .. Works like a charm.
  8. Thank you very much. I ended up ordering the part off eBay. It should fit .. If for some reason it does not I will definitely take you up on your offer .
  9. Thanks Barry .. I already have a 'message seller' in for this. I need to make sure the dimensions are correct. It cannot be any longer than 35" .. Apparently Samsung made several different length doors. There are several part #sDA97-07661 but they have different ending letters T, D, C .. etc. Hopefully this one pans out. Thank you Hey Richard .. Yes, I saw this as well .. I just need to make sure of the dimensions that were not listed. I messaged the seller. Fingers crossed. I assume a repair person would disassemble the flapper and fix/replace the broken hinges. That whole deal would end up costing me over $300 .. I'm hoping this one on Ebay is the right size. Its an easy peasy fix with the right part. Thanks
  10. Hello. We have a Samsung residential installed in our 2002 Monaco Windsor... Model #RF18HFENBBC .. The Flapper Door Cover with Mullion Heater, part #DA97-07661T has broken off its hinges (my wife fell into the door). She's ok, the flapper not so much. The hinges (3) are all broken. I can sort of put it in place by hand then shut the french doors. I'm fairly certain the heater is also still working as the wiring harness was not harmed.... Easy fix but I cannot find the part. I did order one from Genuine Replacement Parts .com but when it arrived it was the incorrect size. This was my fault. After discovering my error I went on a hunt for the correct size flapper. Mine measures 35" long, 2" wide and 1" deep ... Its correct part number is listed above. #DA97-07661T ... Every vendor I've gone to and or searched for list the part as 'Out Of Stock' or 'Discontinued by Manufacturer' ... I can probably call a local appliance repair shop and have a tech come over as I did when I needed a new fan and defrost sensor installed but the service call will cost me more than the part. . . I'm wondering if anyone knows of a vendor that might carry this discontinued part? .. I paid $150 for the wrong size part I received. I should be able to return it but there is a small restocking fee. No biggie. I just can't find the correct part. There are several others like the one I bought by mistake but they are the wrong length. It has to be no longer than 35" .... Any help is appreciated.
  11. Hello... I need to replace the entrance door screen. The frame is broken in 3 spots. Well, its not exactly broken. The seams are seperated. there aren't any connecting clips so the seams just flop. . I tried taping them which worked temporarily. I want to replace the whole screen and frame but not sure where to look. I took the screen I have in for repair but the 2 shops I brought it to told me they had no solution for me. Any ideas of where to call to get a replacement ? Thanks LD
  12. Thank you .. So, I saw a white one for $14 from Boat and RV Accessory. Of course its listed as 'Out Of Stock' ... I also saw a black one from Dyers RV .. They have it in stock $44.92 !!! ... lolol. . Get an RV they said. You'll love it they said .. We actually do love it .. Bank account be damned. Thanks
×
×
  • Create New...