Good Morning, I don't have wiring diagrams for my 95 dynasty 36 with C8.3 300hp (Esn 45139753) built Feb. 1995. Mechanical p7100 injection. I've owned it 1yr in wisconsin. My engine has the "flame start system" for "intake pre heat". There isn't a grid heater like my cummins powered Dodge Ram. This system has 2 injectors on each side of the 4" intake tube. The 2 injectors are also glow plugs to ignite diesel fuel while starting below 45°f. Power is disabled above 45°. The "wait to start" light on the dash doesn't illuminate. The bulb is good. The heavy duty relay that powers the glow/plug injectors functions properly on the bench. Fuel solenoid for this system clicks when powered. I have removed the harness for this system to fully inspect/test. This harness is listed as cummins option wr9017-00 p/n 3927339. Based on a thread I found on irv2, somebody posted 2 pages for monaco "intake pre heat wiring diagram 99edp119" for a C8.3, 325 drawn 12-97. (Confusing that they are making a drawing for a '99 with p7100). Anyway, my system as I see it, 27 years after original installation does not have the "synchro start coil commander" as shown on the monaco wiring diagram. If you have a wiring diagram for a 95ish monaco with intake preheat / flame start system, May I see it? Thanks Tim