Jump to content

Stephen Walsh

Members
  • Posts

    35
  • Joined

  • Last visited

Required Information

  • FirstName
    Stephen
  • Make
    Monaco
  • Model
    Cayman XL
  • Year
    2008
  • City & State
    Bakersfield CA

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Stephen Walsh's Achievements

  1. Another question is when using engine brake descending grades with a toad, won’t that overuse the surge brakes on the car dolly saving the coach brakes but burning up the car dolly brakes? I searched for if the brakes on the 4 wheel down toad will engage while using the engine brake. Some say yes that when the engine brake is on it triggers the coach brake lights. The coach brake lights might engage the 4 wheel toad brakes, and be burning those up while descending as well. Third option, no brakes on car dolly. Must be under 3000 total lbs and doesn’t sound safe. Think we will UBER, rent, and or e-bike unless there is a better solution.
  2. Gonna UBER, or rent,and e-bike for now Can buy a lot of that for what it would cost for a toad and setup
  3. Our local RV repairman quoted 300 labor Ana 200 material to replace the slide topper
  4. That’s called a slide topper, not an awning? Thank you for clarifying that.
  5. The living room awning on our 2008 Monaco Cayman is separating from where it is attached to the coach. Does that require replacement? See photos of each side.
  6. Got inspired to get under steps and tighten and lubed linkage. Works fine now. Thanks
  7. The awning over the living room slide out is separating from where it is attached to the coach. Any way to repair other than replacing the entire awning?
  8. Our electric steps started making a noise like an automatic weapon upon retracting. Anyone else had this happen? Watch video to hear the sound. IMG_0620.MOV
  9. Will the rig pull this easily or is it too much weight? The towing capacity lists at 7000lbs
  10. Does the dipstick on the hydraulic jack reservoir pull straight out ? I twisted it but it just spins not unscrews. Don’t want to break it by forcing it.
×
×
  • Create New...