Floyd4949

Thanks.

Link won't open... will you check and repost? I checked Coach-Net site and this pricing is not listed. Thanks, John

Same scenario... STOP Engine light with absolutely no gauge or drivability issues. Cummins mobile tech read code... low coolant. Bad sensor @ surge tank.

Something like this will work for metal. You may have to get creative with "pull point" attachment. Maybe expanding molly or riv nut. A little more creativity would be required for fiberglass. https://www.harborfreight.com/slide-hammer-and-puller-set-14-piece-56894.html?ccdenc=eyJjb2RlIjoiNzA0ODQ5ODYiLCJza3UiOiI1Njg5NCIsImlzIjoiMjUuNDkifQ%3D%3D&utm_source=google&utm_medium=cpc&utm_campaign=20938164463&campaignid=20938164463&utm_content=160638356594&adsetid=160638356594&product=56894&store=&gad_source=1&gclid=CjwKCAiAqY6tBhAtEiwAHeRopQ3FuQQbipF0yh2LsywRSWXTxOk9dmGtkK7ehA4rzlre1wH9iAEWpxoCe3gQAvD_BwE

https://www.amazon.com/gp/product/B07RZT6PV7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

https://www.grainger.com/product/20C840?RIID=65937569715&GID=&mid=OpenOrders_WillCall&gucid=EMT:10101010:SKU:CSM-348&emcid=NA:SKU

Thanks Ivan... exactly the info I was Thanks Ivan... exactly the info I needed. Regards, John

Thanks. Do you have an idea on the aprox. thickness of the outer surface (fiberglass / luan)? I have not yet removed the existing light and that answer may become obvious once I do. Regards, John

I wish to install an upgraded (longer / larger) 12v patio light and am unsure about how to proceed as new mounting holes will be required. It will be mounted in place of the OEM patio light. I'm unsure about the composition / thickness of the exterior side walls on my 2003 HR Neptune. Any advise as to what mounting hardware to use would be appreciated. I'm considering some sort of expanding molly. Below is a link to the light I've purchased. Thanks, John https://www.amazon.com/gp/product/B089NMFRMX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I believe this is the switch you are looking for. https://www.amazon.com/gp/product/B000C9SAJC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I use this along with a 12" long, 1/2" socket drive extension. It allows me to easily "relocate" my filter to the garage floor😊 https://www.amazon.com/gp/product/B08LT64XB1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Correct... ↑ is the one that worked for me. https://www.amazon.com/gp/product/B000C9SAJC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Hi Carey, Thanks again to you and your family for taking on this obviously popular project. Just out of curiosity... how many covers did the kids print and ship? How about a "guess how many beans in the jar" contest ($5 per guess??) as an addition to their fundraising efforts. You could offer the winner a hearty thanks and a virtual "high five". I think it would be fun!!! I'll watch for your reply and jump in @ Venmo if you wanna do it. Regards, John

I purchased the GP 4000 on Amazon at $100. It included a very nice semi hard shell case. Read ad carefully to determine if case is bundled at stated price.

https://www.mcmaster.com/door-weatherstripping/high-temperature-hollow-rubber-surface-mount-seals/ Can anyone with experience re. these products post a recommendation?

Hi Carey, I received and installed my weep hole covers during the hectic holiday season. Now that things have returned to normal I want to take the time to express my sincere thanks to you and your family for all the time spent on this great project. I really enjoyed the thank you cards from the kids. The covers look great, fit perfect, and installed easily as per your instructions. Happy New Year to you and your family! Regards, John

I would be thrilled to purchase (14) right side and (14) left side covers as they become available. Please put me on the list! Thanks and Merry Christmas, Regards, John

NO... Amazon referenced light is 120V. You need a 12V light. I used this light from Grainger: Flush Indicator Light Red 12V Item #: 20C840

Tom Thank you for the in-depth reply / explanation and for the time spent composing it. VERY helpful... I understand what is involved in diagnosing and solving my problem. Regards, John FIXED!!! I finally found the blown fuse shunting power to the LP solenoid. It is fuse #6 in the front distribution panel, located roadside forward of front wheel. Labeled "Service Lights" I hope this helps saves someone the time it took me to find it (after testing fuses in 3 different boxes). Regards, John

Tom Thank you for the in-depth reply / explanation and for the time spent composing it. VERY helpful... I understand what is involved in diagnosing and solving my problem. Regards, John

You are correct... I bought the wrong light. Oops. Could you comment as to why the tank switch no longer opens / closes the tank solenoid? Any suggestions re. solution. We have a trip planned this weekend and it's getting cold in Ohio!

3

I purchased this light in an attempt to fix the "no indicator light" problem". My solenoid was working but no light. I removed old lamp and replace with this and still no light. Solenoid worked. In an attempt to get light to work, I reversed wires and still no light but... now solenoid will not activate. No sound from solenoid and, of course, no gas in coach. I tried jumping wires to lamp together in an attempt to bypass but nothing. Could I have blown a fuse re. solenoid? Searched manuals but cannot find where this fuse may be. Any ideas. Thanks, John

Thanks for the valuable insights and comments... think I'll be looking in a different direction. John

Good morning, I'm considering a BlueFire device for my "new to me" HR Neptune (2003). Could anyone provide any insight or suggestions re. this device found on Amazon? Thanks, John https://www.amazon.com/MasterELD-BlueFire-TM-9-PIN-Device/dp/B07XQRGBR5/ref=rvi_sccl_6/145-6370159-5144348?pd_rd_w=DHjnG&content-id=amzn1.sym.f5690a4d-f2bb-45d9-9d1b-736fee412437&pf_rd_p=f5690a4d-f2bb-45d9-9d1b-736fee412437&pf_rd_r=DYHJFXSPXE99XWCF9D9K&pd_rd_wg=Pc2RF&pd_rd_r=bcabbab4-ae47-4a39-96f9-b4beafc8f26e&pd_rd_i=B07XQRGBR5&psc=1