Jump to content

Jon sweet

Members
 View Profile  See their activity

  • Posts

    7

  • Joined

  • Last visited

 Content Type 

Everything posted by Jon sweet

  1. Jon sweet
    I know where the 12v compressor is, passsenger front next to the generator. I'm looking for the fuse
  2. Jon sweet
    Pulled into campsite and pressed auto level. System leveled coach, turned engine off for duration. next morning all air has gone from system and red LED'S are lit for not level. I thought we had a 12v compressor that constantly supplied the leveling system while parked. I'm thinking we may have a fuse blown in line with that compressor or possibly another issue with it. Where could I locate this fuse to begin my diagnostics. Jon
  3. Jon sweet
    I think possibly that the recommendation to replace the entire pump, valve body and reservoir as a unit was the most practical given the intermittant failure of the system. I don't want to be stranded again with the slides out on a mountain top. Thanks to all. Jon
  4. Jon sweet
    Thanks for the input, Looks close but not an exact match...still looking, I will contact Lippert on Monday for possible candidates. Searching for some part numbers now but it's too hard to see. will advise. Jon Yes, Plugged in and battery voltage is 13+ at the battery and the pump supply Glad this happened while we are home inside the garage !
  5. Jon sweet
    Hey everyone, both of my front slides are currently not working. It’s happened before (extended) on a trip and I was able to run a drill on the motor and it reset that happened 3 months ago. It’s been fine ever since. Now im home and the slides are retracted and the motor isn’t working. Tested voltage going to the motor from solenoid and we have 12V. Anyone have a part number for the motor? Or some input as to if im heading in the right direction? Thanks!!
  6. Jon sweet
    Thanks for the input,I'll search for the reset button. Jon
  7. Jon sweet
    How do I change mt entry / bay door combination on the door handle? Jon Sweet
×
×
  • Create New...