Blue sea ACR remote

[63Hotrod]

After two years with no problems Our remote switch has stopped working. Neither LED is lit and it does not do anything when switched

Fuse is ok checked ground at the battery and the one to the chassis

 

[jacwjames]

Any chance the Bluesea is turn off manually, the nob on top turned to the right??

Not sure if that would result in no lights, never did that before.

 

[63Hotrod]

Jim the know is turned to the far left. If I push the button down I get a solid click. So I think that's right ?

[jacwjames]

Yup, that's right. 

Only thing to check is the wiring at the switch. 

[pwhittle]

I have had good luck with support from BlueSea.

I would try calling.

Paul

[jacwjames]

1 hour ago, pwhittle said:

I have had good luck with support from BlueSea.

I would try calling.

Paul

X2 on this, one of the selling points for me was the warranty. 

[Bob Blackmon]

Have you verified there is power to the red wire from the switch?

[63Hotrod]

Bob the wire is connected to the battery has power and the fuse is good

[Tom Cherry]

MODERATOR NOTE.

It appears that there may be a connection between this topic and another topic dealing with “Overcharging”….or two threads that might be interrelated.

It might be beneficial to review the comments and issues of this this topic prior to commenting.  It appears that the Endeavor has had some upgrades and modifications therefore it may not be wired or configured as it lest Monaco….

if there had not been so many comments, then it would have been merged.

Thanks.