jcavataio5255

I believe this module is used when the coach has the optional 15,000 lbs trailer hitch package, it detects when a trailer is hooked up to the coach and disables the ability to lift the tag axle to carry the extra weight. Valid  1-888-632-6477

Jim,

Not sure if this attachment is what your looking for ?? 

John C

2009 HR Navigator

38000289.dwg

You might want to check around  your Aqua Hot control panel? My schematic is a 2005 version so it may not be the same as yours? but in the 05 version it appears there’s a fuse that powers the relay that send power to that blower? And if the blower motor seized, it probably would blow that fuse?

John C

Hi Ken,

It came direct from a Monaco chassis wiring diagram (attached) for a 2003 Endeavor/Diplomat! 

I wondered the same thing you did, when I seen the wire cut on my previous motorhome a HR 03 Endeavor. 

John C

2003 chassis wiring38020184.dwg

Ken, 

I bought mine off Amazon 

Hi Ken , Can you hear any relays randomly clicking? from your Automatic Energy select switches? (P/N 00-00714-00)  not sure where they are in your coach maybe in the rear closet assuming you have one? Or possibly under the floor in the back somewhere?

If you do, it could be a bad Automatic energy switch! I just had the same problem.

John C

2009 Navagator 

7 hours ago, Donnie said:

John, I looked at everything I can think of and no luck. The fuse is good, the lights on the switch come on when toggled. The switch doesn’t control power going to the valve. My system has 2 blue wires going to one of the red wires on the red hat, that seem strange to me. The valve does click or make sign of trying to activate.

thanks 

Don

Don,

 Did you check the switch to see if it is grounded?

Hi Don,

It appears there’s a 5amp fuse/ circuit breaker that feeds 12v to the red hat and Auto-Fill module, if that’s ok and the switch is functional ?? the Auto-Fill Module located on the front wall of the wet bay either has a bad connection or the module failed???

Hope this helps?

John C

2009 Navagator 

Hi Brett, 

I changed my original A1-1205 Hydraulic oil filter with a Wix 51849 high volume version, longer filter but same mounting as the original.

Wix does make a direct replacement 51759

John C

2009 HR Navagator 

Not sure if it is in the same place as my 09 Navagator? But my  Vorad control module is located  under the Driver’s side shifter console attached to the outside wall.

John Cavataio

09 HR Navagator 

The forum is correct!

Does yours look anything like this?