Robertpk

Good afternoon to all. I also have a 2005 ambassador and the empty relay connector is for a daylight running lights. I have wiring diagram for 2005 ambassador.

2005 Ambassador wire diagrams.pdf

Rocky Mount Radiator and a/c.

Rocky mount NC 27803

252-937-8900

I replaced mine several years ago. The brand name is Hella. I bought the low and high beam from Amazon.

I had to replace my radiator 2 years ago after a trip to Florida. After I removed the radiator and took it to the repair shop the fellow told me it was the second one he has done so far that year. He told me they were bad for rotting g out In the corners. Cost was$1300 for a custom made unit.

Good evening to all. I received my rivets from Mcmaster-carr today. I ordered 250. I also ordered a pneumatic rivet gun. The rivet gun works great. I removed 50 screws on drivers side upper belt line tonite. The problem is cleaning off  all of the old silicone. All of the screws came out except for 1.

Anyone have any suggestions for removing the old calking. 

Thank yo.u. Ordered from McMaster. Will be here on thursday

Good evening to all. My wife and I went away this weekend and discovered a water leak. My belt lines are loose. Screws were used and aluminum pop rivets were also used. Can someone tell me where I can buy 3/16 x 7/8 grip 304 stainless steel rivets. Can’t seem to find them on Amazon. I do have several left over from my guardian plate installation. Thanks to everyone on this site for all the knowledge that shared with everyone.

I took my coac to Clark Power Services In New Bern. Great folks to work with.

Thanks for the  files for the sun visors, I will try and pri t them by the weekend.

Hello and thank you all the folks that take the time to run this website and all who contribute their knowledge answering all the questions.I have a 2005 Holiday Rambler Ambassador. I noticed that the plastic end pieces are broken on the carefree power sun visor.I am hoping that someone on this site might just have a stl file so they can be 3d printed. I am still very new to cad and it is way above me. Any help with this would be greatly appreciated 

Thanks again for the file for the weep hole covers, they work great

I would like to say thank you for th stl file for the weep hole covers. Our motorhome only had 4 on the drivers window. I wound up making 30 for the left and rt side.This forum is a great place to get information about our coaches. Once again thanks to all.

Here is a copy of the wiri g to the vac. Pump. Hope this helps.

Hello all, I to had a leak over my door. Turned out the pop rivets holding the awning to the coach were gone. Used 1/4 inch pop rivets and the leak was gone. Hope this may help.

Hello I too have a 2005 ambassador. The alternator is 160.amps.