Megame
-
Posts
13 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Posts posted by Megame
-
-
Thanks Wayne, much appreciated. I am in Ontario, but now have a contact in Canada. That helps! Stay safe!
-
Wayne, thanks for your reply. Can these motors be rebuilt? It sounds like a bearing is going on mine. And could you give me the name and address of your supplier for the motor as well please!
-
Not quite on topic, but what did your new burner motor cost?
-
I don't think it will hurt anything. Heck we ran with ours like that for about a full year and we full time. Like any other mechanical beast, it should be changed, but this certainly isn't life threatening, at least in my opinion. I had no idea ours was in need of changing, we bought the bus and I thought that was just the way it was. The things you learn as you get into it<grin> But, easy access on the D60 to change it, and easy to do. Much easier than a new rad, CAC and oil cooler<grin>
- 1
-
Hi, we had the same issue last year, it was discovered when I brought the big girl in for a new radiator. I think it was around $300 plus install, but the install is very doable on your own to install the WACS valve. No more issues.
-
Make sure your tag axle is not in the up position...you could have inadvertently hit that toggle.....happened to me once.
-
10 hours ago, Hypoxia said:
If you have the Actia gauges like my 2007 I may be able to help. I don't know what years other than the 2007 have it. The Actia panel is easily identified by the daisy chained violet, orange white wires going from each gauge to the next. It has a module which converts pressure to an electronic value to the instrument panel. Here's a photo of that module and those wires. If you have this let me know & I may be of some help.
Thank you very much Hypoxia, it appears that a reply below has found gauges on ebay. Thanks again, I am going to the bus Thursday and will look for that wire set up and get back to you.
5 hours ago, pwhittle said:In 2005 the instrument panel was made by Faria Beene.
I have confirmed these work with our 2005 Signature.
https://www.ebay.com/itm/233346308381
https://www.ebay.com/itm/312773539212
Paul
That is awesome Paul, thank you very much!
-
Yes, Vito, thanks. Pressures are good. I have not yet checked the tank sending unit on the front, the rear was checked previous and is good. I will reach out to Hypoxia when I figure out how<grin>
-
Hey All:
Looking for some help. It appears that my 2nd air pressure gauge has kicked the bucket. Any one know where I can source a couple of new ones?
-
Hope it works for you.
-
Florida Automated Shade
You can google their contact info.
-
All of this info is not quite true. We are full timers, and we are back in a campground. Those campgrounds that were open before the "emergency" came into effect, and in fact had full timers as customers, were allowed to remain open. We are in Wildwood campground just outside Windsor Ontario.
Things are now beginning to open up, May 4 here in Ontario begins the start up of many businesses. I think campgrounds will soon follow.
Hope this helps to clarify things.
2007 Monaco Signature. Air Leveling and Transport to Repair facility
in Compressed Air Systems
Posted
I used Iron Horse RV in San Antonio a few years ago. New engine radiator, cleaned the CAC, and repaired a few miscellaneous leaks. Great people to work with in my opinion. They've since changed ownership hands, but it appears the quality of work has remained. I would not hesitate to return there.