Danny B.

I would contact the Bluefire owner,  he is really good about geting you are the information you need. I had a similar question and I didnt understand his response but he did dummy it down for me to understand.

Where is y'all going? I must have missed something!

I have one but dont know how to share it

Yes i do because my gas gauge stoped working. I have recently had the gauge fixed at a very expensive fix. But i still use the BlueFire because of all its extra features.

19 hours ago, tmw188 said:

After cleaning everything really well I want to try and keep it that way. I’ll keep an eye on it to see how quickly it fills up, I would think extremely slow. Valve cover cap was leaking too.

Awesome thank you for sharing.

17 hours ago, Timaz996 said:

My tube is about a foot longer then yours. Make sure you have a hole at least 1" diameter near the top to allow air out. (vent) If you don't have a vent it will build pressure. When I change my oil I put in 5 gallons. This in just above the add mark and my engine doesn't use any oil or blow it out the tube. I only get condensation in the bottle. If I put the oil level close to the full mark my engine will slowly use it out the tube.

 

Tim  

Nice I'll give this a go on my next oil change.

3 minutes ago, JDCrow said:

https://www.ebay.com/itm/Mishimoto-MMOCC-LA-Aluminum-Oil-Catch-Can-Large-/324064478678?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

 

I got mine as an open box

Thank you

1 minute ago, JDCrow said:

$80 

Where can we find this unit?

31 minutes ago, tmw188 said:

Did I see that on another post? I was thinking something similar but without the steel wool. You have a picture of it?

Do you have pictures you can share?