Rob connors

Thanks for posting be sure to send pictures later

40 minutes ago, Scott 61 said:

It might be a light to indicate that your tow vehicle brakes are on

41 minutes ago, Old Dog said:

Self destruct system activation indicator?

That’s funny stuff Old Dog 

Can Anyone tell me what this red light is on for cannot find any documentation anywhere TIA

Is that a Gates number for belt

I have no dash switch just a foot switch 

Has anyone wired there foot switch pedal directly to the solenoid that activates exhaust Brake (PAC BRAKE) Bypassing ABS Relay box and Ecm this is on 8.3 Cummins 1995 executive I know I will have to downshift transmission manually

anyone have any Pros and Cons … Thank You 

I have some but won’t be back home till October 1st Sorry I think I was the one that mentioned that I had some 

Usually when Turn Signals get weird it’s a ground problem if have found in the past

Thanks A lot Dennis

I didn’t know PAC Brake could be replaced without specialized tools.I thought it was more like a Jake Brake Thanks for educating me .I have been digging deeper and I understand it a lot better thanks for your post 

Dennis

are you talking about the quick relief valve ? if so I’m sure I can replace it if I know where to look for it . Is it on the exhaust or intake ?

Thank You Richard really appreciate response I will check John out

Thanks Dennis

It is original I can't tell if its working or not it seems to downshift the transmission but not very effective.. Who would I get to install it does Pacbrake have authorized service team

I have a 1995 Monaco Executive with a 8.3 Cummins engine .Does anyone know where I can get my PAC Brake serviced in Florida .. or anywhere TIA.

Looking for a 12v motor that burnt up on my Thomson Saginaw performance Pak . I only need the 12V motor it is used to slide generator in and out Any help would be greatly appreciated

On 1/21/2021 at 5:17 AM, John Haggard said:

Thats good service Richard 

And why we use NAPA batteries in the semis and farm tractors also.

We had lunch at Martins on Tuesday.

 

Love that Prime at Martins

I need to replace my NAPA 8D Chassis Battery 110O CCA which is very Heavy. I would like to know if I should replace it with 2 each 12volt Battery wired in Parallel ? I would like to know everyones thoughts.