Will52

T-Mobile is nonexistent in Yellowstone National Park no phone no nothing FYI

fuse 50 amp?

Rollers can be adjusted it may a challenging to do. And the slide may need to come out?

8 hours ago, 1nolaguy said:

jacwjames, thanks so much for posting the link. While wood is not probably the best choice for me it gave me some great ideas and a connection to directly ask questions of someone that already did the project. It is ironic that I am a member of irv2.com also and had not seen this.

Will52, did you have any issues with connections going from the OEM radio to the Boss?

Easy install Car play with apple phone and watch with turn-by-turn directions and Music off phone. Happy with it.

The plastic was chipped and we replaced it with black walnut panel. And the ten inch Boss with CarPlay helped with navigation.

I'm the second owner and have some prints will share when I can. Check batt's tomorrow with shore power off. Last checked floated 4 ball all cells. 

Magnum inverter shows fault and low voltage going down the road. NP/OK on shore power and Genny running, is there a relay that's open from the engine alternator? The gauge is showing 13 volts +. NP with truck batteries.

On 2/7/2021 at 8:58 PM, astgerma said:

I am interested in changing out my magnadyne m9900dvds as it is the second one that I have and does not work.  It lights up but nothing happens.

Looking for alternate radios that will fit in the hole or have an adapter plate for a new radio.  would be pleased to see what other have done.

reset? JS

Thanks Larry I thought it had to be close to the switches. I will also look for the breakers. We have power at the on/off switch.

Any one has an idea where the awning controller is? I did a search for it no luck...

   UPDATE...We could not find anyone that would do conversion on site (RV Park) So we did the Dutch Aire and went 12 Volts with dual compressors and fans. Currently nice and cold and frozen solid in the freezer. Customer service with JC refrigeration was excellent!

Thanks Tom This is the first year in this RV we full timed. In a Gasser for five years this is a different animal. 

Hello all, does anyone know where the curb side controller may be? It's a Schwintek slide Living room Big slide. Thanks in advance.

3 hours ago, Ivylog said:

That’s fine BUT the micro and some outlets are still powered through it…has a transfer switch in it.

Every thing is working fine with it off

When we are on shore power we turn off our inverter JS 

Anyone know where Holiday Rambler Endeavor emblems can be found? I would like to replace them and a 400HP too.

Obsolete per REV? 

1 hour ago, Will52 said:

We converted our 1200 with the Dutch air 12 volt working perfectly.

35 minutes ago, Dr4Film said:

A photo of your current NotSoCold would help in suggesting ideas as to securing it as it differs depending on whether it will sit on the floor or will be on a platform.

The Samsung in my previous Windsor is secured from below up through the platform into the front feet. There are also three secure points in the rear using lag screws and fender washers. hasn't moved in 11 years and is now with the new coach owner.

The Same Samsung in our Dynasty was already installed when we purchased it earlier this year. No idea how they secured it and hopefully I will not need to find out.

I have run both Samsungs using 4 - 6 VDC Sam's Club GC-2 batteries wired in series/parallel with no issues. The Inverter in the Windsor is a MSW Xantrex/Trace 2000 Watt, and the Inverter in the Dynasty is a Magnum PSW 2000 Watt.

The Samsung RF-197 which is in both coaches used on average around 1.8 KW's each day. Not sure what the Samsung RF18 would use. Possibly some member has done a study using the P2 Kill-O-Watt over a few weeks or months to calculate what the amp/hour usage is for the RF-18.

Can't help you with any solar as I have never done that nor needed it.

We converted our 1200 with the Dutch air 12 volt working perfectly.

20 hours ago, Will52 said:

Has anyone replaced a Norcold 1200 and gotten it out the curb side window? Going to a Samsung RF12 in the same window 2005 Holiday Rambler Endeavor Looking for Idea's THX ALL.

Now RV guy say's won't come outside window and the Samsung won't work cause Furnace is under fridge this really stressing us out.  I need a break. Thanks for all the help. Will.

Has anyone replaced a Norcold 1200 and gotten it out the curb side window? Going to a Samsung RF12 in the same window 2005 Holiday Rambler Endeavor Looking for Idea's THX ALL.

Amazon has Electric traps... Bait with peanut butter works well.

Those panels are better off on the roof of the coach JS 

I would take the switch out and see if an Auto parts store and try to match it up. Most 6 way switches are all similar. Maybe a part # on the back? Flexsteel?

Very nice Thx for sharing!

Rural King has great prices hope one is near.