streetrodder

Burn up when toooo much heat NO flame heat gun

There great 

They're great

napa auto parts has the fittings just replace it's hose end leaking have to cut about a 1/2 inch of indentation off

JB weld

amazon

Bought mine at Amazon

center punch and a hammer

I would be interested ,have to sell my  2000 windsor unless you would take it in trade 

1 hour ago, mschfmkrs1 said:

Does anyone have a source for the larger 5 inch exhaust "chrome tailpipe" to fit Monaco Signature?

Thank you,

Ed Hildebrand

 

IOWA80.com

Hot shots/ ATF old truckers trick 

a good machine shop can fix this hands down!!!!

might have to travel to chico I know of one in Marysville

Coopers

go to a bearing house and match them

Harbor freight 

I would look at the trailing arms or the frame where it's welded to the rear end I have 2000 windsor and it was cracked at the axle 

I'm interested can I see the back side thrty3chop@aol.com

Just replaced the rear bags on my 2000 windsor think there the same got them from NAPA W03589376 $260 each direct fit

2 hours ago, fredelkamp said:

I'm looking for replacement Air Bags for my 2008 Monaco Diplomat 36PDQ. It's a Roadmaster RR8R (8 air bag system). I check with several vendors suggested here and the only response I got back was:

"Most common is W01-358-9376 with the 1/4" NPT air inlet on the rear and W01-358-8897 with the 3/4" air inlet on the front. They could also all be W01-358-9376 air bags, you would have to check the air line size or call Monaco to be sure. Some people go with all W01-358-8897 bags and bush down from 3/4" to 1/4" if needed."

Since I don't think I have Ping tanks, I think the W01-358-9376 with the 1/4" NPT air inlet, but thought I'd check with the experts before I order them. Any help would be greatly appreciated. 

I just got bags from Napa for my windsor 264 per bag