eyeball
-
Posts
14 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Posts posted by eyeball
-
-
Does anyone have the schematic for the trombetta delay start relay/solenoid. I need to know if the board is sending power to the solenoid and what to verify the board to rule it out. Ty
-
So while driving it will change the house batteries
On 2/26/2022 at 5:18 PM, BradHend said:Am thinking about buying the BlueFire adaptor for my coach, and was hoping someone on here may be able to verify a question I have. My coach has a 9 pin diagnostic port in the rear engine bay, and a six pin port in the front cab. The question is, will there be less information available via the 6 pin port, and should I be purchasing the 9 pin extension cable and bring it all the way up front.
Thanks, -
My solenoid is not charging my house batteries while driving what style replacement do I need thanks
-
I just bought one. 2006 hr 40pdq endeavor I had to buy the 6 to 9 adapter everything work 1st time now will not connect. Sending back Monday morning
-
I have the adapter 9 to 6. Just can't get it to plug in
11 minutes ago, jacwjames said:I think you may have to get an adapter depending on how many pins you have. https://www.amazon.com/My20-ELD-Adapter-Cable-J1708-J1939/dp/B076R1Z937
-
Well I bought a bluefire. But I can't seem to get the the adapter courd plugged into my diagnostic port any suggestions before I send it back.
-
5 hours ago, Scott 61 said:
Do you have an aladdin system if so you should be able to monitor your engine gauges
No
No aladdin
-
2006hr endeavor 40pdq. My Guage is always at the hot mark. I have not numbers also. That is why I'm thinking about getting a bluefire. Following
-
-
2006hr endeavor 40pdq sound system how does it work
-
2006hr endeavor 40pdq. I'm looking for a new headlight switch. Part number or any help. Thanks
-
The bluefire just plug in and set up that all
-
Does anyone use a bluefire. My gas gage doesn't work and though about this.
2006 holiday rambler 40 PDQ endeavor
in Electrical Systems
Posted
Well after a few more things don't have 12v between red and black isolator delay circuit board,even when trying the battery boost switch. There is 12v on the blue wire though wonder why. The 5 amp fuse is good no 12v at purple & white wire on solenoid switch. Is there a breaker feeding the circuit board. If board is bad where would I get a direct replacement. Thanks all