Jump to content

rvfuntime

Members
  • Posts

    3
  • Joined

  • Last visited

Posts posted by rvfuntime

  1. On 9/13/2021 at 7:47 PM, pwhittle said:

    We were camping this weekend and it was time to dump and refill the fresh water tank.

    I pulled the paddle handle, and it partially broke. Fortunately I was planning on upgrading to chrome handles and I had the replacement on hand to study and replace the old one when I got it out.

    The paddle operates a shaft with a cam on the end that rotates a plate that has four arms with holes for various installations. There is also a locking mechanism that prevents the plate from rotating when locked.

    One end of the shaft is round (approximately 8.7mm) and the other is a Double-D (approximately 5mm across the flats).

    I studied the replacement and was planning on drilling some holes to be able to rotate the plate, but when I examined the the failed lock I found I could pry the old paddle off and turn the shaft with a 1/4” wrench to get the bay door open and replace the paddle mechanism. I did have to drill out the hole that the lock mechanism shaft went into It was a little too small.

    This handle is on one of the bays that cantilevers up. Note that Monaco riveted a plate over the lower section to provide somewhere on the handle to pull the bay door down.

    Paul

    4C2DC48A-96E0-4262-AF9A-E2E26D8A8A29.jpeg

    A76FCA08-7FFF-4A4F-976C-949149F1F97A.jpeg

    E6456319-5081-4E2B-A23B-9D8DB1008EF1.jpeg

    C4DBA6BB-CCC2-4CA1-9B83-92F0FB78E9BB.jpeg

    63F973F0-AC8E-41D4-9E24-37E5E432D74D.jpeg

    CAD75222-2844-4C4B-8F59-712C04DEEF04.jpeg

    7D92B581-1159-4BA7-AE61-E06D280FE770.jpeg

    A348BFB7-F865-4836-B744-7AFD4D0B2A22.jpeg

    75F8AFDD-547E-4FA4-9072-6E7E816A7595.jpeg

    Hi , I'm new to the forum and was reading about your experience with your lock/latch/handle . It looks like you found a new chrome one . I am looking for a new white one for our 1999 Monaco Signature  . The only difference i see is the location of the key lock and the riveted on plate . If you have a part number and where you found it I would appreciate that information  . Enclosed is a photo of the one I need . Thanks  , Murphy 

    20221201_111950.jpg

×
×
  • Create New...