Jim Dinwiddie

Just FYI, I finally got water to the ice maker.  What I found was the water filter in the refrigerator was broken and not depressing the valve that lets water flow to the cold water outlet and the ice maker. $57 dollars and a new filter and we have ice. Thanks for all the pointers on where to look.

Sorry guess I needed to add more info. It's not the hose or power cord reels, water pump or Sanicon. It's inside the water manifold compartment, the print on the switch is 4 AMPS. turning it on and off doesn't do anything that can be heard.  There's nothing in section 8 identify or even showing it.

I know it's not a battery but couldn't find a topic for switches. Found this switch in the wet bay. Any idea what it's for? 

I did a search and found plenty on slides not staying in at the top but mine creeps out at the bottom. Since the top stays put I'm assuming the lock mechanism is working, what is supposed to keep the bottom in?

6 hours ago, Ivan K said:

iThe compressor is pretty much unnecessary if parked on level ground and there are NO leaks in the leveling system. If it kicks in, it is to compensate for leaks or, if on uneven  ground for bag pressure changes with uneven air volumes in them. My Thomas compressor lasted for over 20 years and then it only needed to clean the collector area. It stay where it always was.

Where is it located? 

6 hours ago, 96 EVO said:

Yeah, would have been helpful to know if any side or corner had dropped significantly.

The coach is level, the control panel is flashing and the solenoids are clicking, like it's trying to adjust. Y

Almost a week of ownership, still learning about all this 2007 Dynasty has to offer. Our first night our site had a pretty good slope that raised the rear quite a bit, to the extent it couldn't self level but really close. Next site and current location site is really level, self leveled no problem, but wasn't long before the control panel started flashing with the slope indication. Started the engine leveled but again next morning same flashing, this time I noticed the clicking of the solenoids attempting to level.  I've checked fuses all good. Looking at the information here, I'm thinking the aux leveling compressor isn't working. Any other ideas or tips greatly appreciated. 

TIA

I'm not getting water to the refrigerator, all valves on the, manifold appear to be open, but the label telling what each valve controls is missing. Can someone with a 2007 DYNASTY take a picture of valve layout?  TIA