-
Posts
12 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Posts posted by DVerstra
-
-
Quote from Frank McElroy
"Yes, you have a leaking valve. Likely a small amount of debris is keeping it from fully seating. When bringing in the slide hold the slide in button for a few seconds until you hear a pitch tone change from the pump. This might clear the debris from the valve seat. "
I used this method when closing the slides. Woohoo! It appears to have worked. No problem with slide extending during trip North from Florida.
Thanks Frank and others for this TIP
-
On 5/2/2023 at 8:07 AM, TOBYLB4 said:
Bob I need 10 of each side when they are available.
Thanks Toby
Sorry my request was to Cary.
Toby
I have 10 of each available. PM me if interested
-
10 hours ago, dennis.mcdonaugh said:
Your coach should have come with two slide locks to keep that from happening if the hydraulics fail.
Coach did not come with slide locks that I know of other than the Driver side front slide has a lock mechanism. I don't see a way to insert a slidelock on the passenger side. The passenger side slide is within an inch of the ceiling when closed and has an accordian style cover on the side.
-
Thanks for the help on this. I don't see any leaks. I'll try the "purge" idea and see if the problem goes away on the next drive.
-
While driving through a hilly area with a lot of curves in the road, our passenger side front slide worked its way out. I looked in my mirror and it was out about 8". I found a pullout and placed the transmission in Park. Then I brought the slideout in. The entire slide was out not just one corner. It is a hydraulic slide. The valves and reservoir tank are under the front stairway with access through the step. I checked the reservoir and the fluid is correct on the short dipstick. What are the possible causes? I'm thinking of either a valve that is allowing the fluid to bypass or a cylinder issue.
-
10 hours ago, Donflem said:
I want to thank Dave V. I received and installed them today they fit great thank you for making them for me.
DonYou're very welcome Don.
I have 10 Driver side and 10 passenger side completed. If anyone is interested, please PM me. I have strengthened the tabs also
-
I've been making these on my son's 3d printer for my own use since last year. They are made with black nylon. I can make some for those of you without a 3d printer source. PM me with amount needed. I'm thinking of going to The Gathering with a bagful as party favors. :>)
- 1
-
We did the tour with Fantasy RV a few years ago. Our two Corgis were treated well by the campground owner in Thompson. She walked them and fed them. Saw a great Northern Lights display one night. Saw only two bears since it was early in the season. One at a distance and one close up.
-
Count me in also. Long time lurker here.
-
On the liftmytv website in the parts section they offer a wired remote for their controller. If you are tearing things apart to fix a problem with a missing remote, wiring the lift with an additional switch or ir remote might make sense. I ended up wiring a toggle switch for mine
This is my first post so please tell me if I violated any norms.
-
Great Site. Testing my signature
Mobile RV Service
in RV Service Reviews
Posted
Speedwrench in Hudsonville, Michigan has serviced my motorhomes and done a great job. They offer mobile service also.
https://www.speedwrench.com/