georgeandlouise1

Buy oil from Sam’s and filters from Napa

We built a shelf out of aluminum and used non skid tape on the shelf and use a plastic container with top and store our rv wax and gallon of soap and other cleaning items.

george

2007 Dynasty countess 3

Thanks but I need the bushing end to be 1/4 push on type so you can put the 1/4 inch rear air line hose into the fittings.

 Thanks again for your reply.

Thanks for your information.  Could you please tell me where I can purchase the 3/4 to 1/4 bushing.

George

Thanks 

Thanks for your information.  Will try to buy some.

george

If I buy the elbows do you think I steel need to buy 1/4 inch push on hose fitting?

Thanks will check with them

We have a 2007 Monaco Dynasty Countess 3 and want to change the rear air bags.  We have Contitech 9 9 -12 and have ordered the replacements.  We need the 3/4 to 1/4 push on air fitting reducer bushing.

We have tried Napa but they don’t stock any and said they can’t order it.

The picture shows my existing bushing that I will need to replace.  Does anyone know where I can order replacements?  

I will appreciate help!

George

I am continuing in my attempt to make repairs on the smart wheel.  As suggested I checked the connections at the bottom of the steering column & all seem okay.   I ordered & receive a new clock spring from Veurinks.  

To install that I removed the steering wheel center cover, unplugged the horn connection, & removed the nut using a 32mm socket.   The next step was to attach a wheel puller using two size 1/4 x 20 that is 3-1/2 “ long bolts in the steering wheel opening.  These bolts are on each side of the steering column rod.  The steering column rod where I removed the nut was where pressure was applied hoping the wheel would release.  That did not happen even as I increased more pressure using an impact driver.  I even used a hammer to hit the center bolt & it still would not release.

I am afraid to continue applying more pressure on the center bolt in fear that the other bolts holding the wheel release could break & ruin the steering wheel.

I have a question.  Is there anything else possibly holding the wheel in place that I need to remove or any other suggestions from experience.  I will appreciate help.

George Dunn

Thanks for the quick replies.  Checking that wiring will be my next step.  I will stay in touch.

George

Our 2007 Monaco Dynasty Countess 3   Smart wheel stopped working recently.  I have checked the fuse & it is ok.  The light shows green on the module.  I moved the wheel forward & backwards & the functions started working but stopped after moving the wheel back to driving position.  Does anyone have ideas about what the issue might be?  I have researched but the only thing I have found is that it could be the clock spring needs replacing.  I will really appreciate any help because the windshield wipers not working is a terrific problem.

George Dunn

2007 Monaco Dynasty

Countess 3

Paul your pictures didn’t show .  I am interested in your cameras.  Please send me some pictures and advise me how I can contact you.

thanks, George

2007 Dynasty 

Thanks for your reply.  It is a steel tank.  

Our 2007 Dynasty with a Roadmaster chassis has a tiny hole in the front air tank and I need to replace it.  I have not been able to find out where I can buy a replacement.  I am hoping someone can help me with this information.  I will appreciate any help.

Thanks,

George

How often does your pump come on?  Will it keep your coach level?

Thanks for your post.  Our Sealand Magnum model 3110 is intermittently failing to flush so I am very interested in your replacement board.  I have searched every avenue that I know of and cannot locate a replacement.  Is it your process to take the existing Sealand board and rebuild it or do you start from scratch and make a new one?   Please put me on your list to see if your board will work on my toilet.

We are registered for the Gathering Monacoers Rally 2020.   You have given me some hope to not have to replace the whole toilet.

George