georgeandlouise1

Buy oil from Sam’s and filters from Napa

We built a shelf out of aluminum and used non skid tape on the shelf and use a plastic container with top and store our rv wax and gallon of soap and other cleaning items. george 2007 Dynasty countess 3

Thanks but I need the bushing end to be 1/4 push on type so you can put the 1/4 inch rear air line hose into the fittings. Thanks again for your reply.

Thanks for your information. Could you please tell me where I can purchase the 3/4 to 1/4 bushing. George

Thanks

Thanks for your information. Will try to buy some. george If I buy the elbows do you think I steel need to buy 1/4 inch push on hose fitting?

Thanks will check with them

We have a 2007 Monaco Dynasty Countess 3 and want to change the rear air bags. We have Contitech 9 9 -12 and have ordered the replacements. We need the 3/4 to 1/4 push on air fitting reducer bushing. We have tried Napa but they don’t stock any and said they can’t order it. The picture shows my existing bushing that I will need to replace. Does anyone know where I can order replacements? I will appreciate help! George

I am continuing in my attempt to make repairs on the smart wheel. As suggested I checked the connections at the bottom of the steering column & all seem okay. I ordered & receive a new clock spring from Veurinks. To install that I removed the steering wheel center cover, unplugged the horn connection, & removed the nut using a 32mm socket. The next step was to attach a wheel puller using two size 1/4 x 20 that is 3-1/2 “ long bolts in the steering wheel opening. These bolts are on each side of the steering column rod. The steering column rod where I removed the nut was where pressure was applied hoping the wheel would release. That did not happen even as I increased more pressure using an impact driver. I even used a hammer to hit the center bolt & it still would not release. I am afraid to continue applying more pressure on the center bolt in fear that the other bolts holding the wheel release could break & ruin the steering wheel. I have a question. Is there anything else possibly holding the wheel in place that I need to remove or any other suggestions from experience. I will appreciate help. George Dunn

Thanks for the quick replies. Checking that wiring will be my next step. I will stay in touch. George

Our 2007 Monaco Dynasty Countess 3 Smart wheel stopped working recently. I have checked the fuse & it is ok. The light shows green on the module. I moved the wheel forward & backwards & the functions started working but stopped after moving the wheel back to driving position. Does anyone have ideas about what the issue might be? I have researched but the only thing I have found is that it could be the clock spring needs replacing. I will really appreciate any help because the windshield wipers not working is a terrific problem. George Dunn 2007 Monaco Dynasty Countess 3

Paul your pictures didn’t show . I am interested in your cameras. Please send me some pictures and advise me how I can contact you. thanks, George 2007 Dynasty

Thanks for your reply. It is a steel tank.

Our 2007 Dynasty with a Roadmaster chassis has a tiny hole in the front air tank and I need to replace it. I have not been able to find out where I can buy a replacement. I am hoping someone can help me with this information. I will appreciate any help. Thanks, George

How often does your pump come on? Will it keep your coach level?