jimclark44

2006 Executive PS bedroom slide comes out about 6" when I move the coach. Never did this before. I removed the carpeted cover along the floor to look at the rollers, but did nothing but look. Any suggestions?? Jim Clark 2006 Monaco Executive Sandia

The attachment is what I have been looking at. Is this adjustment something you would advise someone to do themselves? I have decent skills, however we full time in our Monaco so don't want to get half done and determine I'm in over my head! Bedroom Slides Adjustment.pdf

Sorry for the late reply! On the bedroom slide there was a nut that came off of the adjustment. It is a lock nut so not something that is causing a problem. I can see where the nut goes with a mirror but no way to get to it without removing the trim. The bedroom slides do not need much, if any adjustment, however my PS kitchen galley slide needs to be adjusted vertically up. I believe they are both Lateral Arm slides and by HWH adjustment instructions it should go back to the manufacturer. I would like to remove the trim on both slides to look at the adjustment.

2006 Executive, I need, or want, to access the hydraulic adjustments on my raised floor slides. I was previously told the vertical trim was held on by industrial grade Velcro. It may be, however mine is not budging and I don't want to break it. Has anyone had to remove theirs?

This what I ordered from REV about 4 months ago. 6.5" X 4.5" 10115987 / 03213707 / EMBLEM, MONACO SHIELD OVAL SMLABS E Cost was $39 and change with shipping and tax.

I, (Warranty Insurance) paid $942.00 at Alliance Coach. All I know is what the two techs. that plugged in to the coach told me. "Bad brake sensor" If I knew then what I know now I would have ask many more questions. No Vorad!

The engine does not idle up. The only sensor/switch I haven't checked is the one on the park brake.

Thanks David, Are those switches shown on the wiring diagrams? Nothing works from the wheel. All other buttons work on the wheel with the exception of the Cruise. Push the cruise and the light on the dash comes on but nothing else related to the cruise.

Ray, I remember that post and mine are working fine! I have tried that with no luck. It seems that the cruise believes the brake is on!! Ron, I will pull the work order from Alliance and let you know. My extended warraty took care of most of it.

Cruise Control still not working. New VIP module, new clock spring. Alliance Coach computer showed I needed a brake sensor. I replaced the only one I could find, no luck. My mobile chassis tech put his computer on and it showed the brake sensor. He jumped the brake sensor but nothing. How many brake sensors are they? Any suggestions as to where the problem could be? Any suggestion for a trusted shop in the Tampa Bay area that could work on it. Thanks in advance for any help. Jim Clark 2006 Monaco Executive

Chris, I know right where you are as I parked in your home driveway when you installed two sets of guardian plates. I have checked the belt lines and can see no break anywhere. All caulk looks good.

Dennis, Good suggestion, however this just happens when we get a rain. We are in the Tampa, FL area and have not had much rain until lately. I have taped a piece of white plastic over the area so I can see when it occurs. Suppose to get several inches of rain in the next few days so I will see. Jim Clark

I have some ugly streaks showing up under the bathroom window. (See Photo) I have checked the window caulking, upper beltline, window weeps. Everything looks fine. Water is finding a small channel behind the fiberglass and running out at the wet bay door. Anyone have any suggestions?? Jim Clark 2006 Monaco Executive

I was hoping it was Velcro! It seems pretty tight, but probably hasn't been off in years. Learned a lot about the rollers and what was underneath, just as anxious to learn more about the sides. I've got sketches, but nothing like seeing the real thing, especially when 3 of my slides are operated the same. Jim Clark

Follow Up: I finally located the screws and removed the cover. (See photo for screw location) The rollers are much smaller than expected but seem to be in good shape. Many loose screws and tyewraps. The large washer that I had previously found was from the front slid adjustment. Looks like I will need to remove the trim to get to it. I can see it with a mirror.

I have looked for screws with no luck. Pulled the hamper drawer and found some electrical, mainly to the TV. Found that drawer slide was bad so replaced it. This slide has not given me too much trouble. Had Talin install Guardian plates last year. I have found some mysterious washers on the floor and wanted to inspect the rollers. The cover moves about 1" up, down and back and forth. I thought there may be some secret Monaco latch that I couldn't find. I will report back when I get it removed. Plenty of time right now so hasn't been a problem. Thanks for all the input!!

I would like to access my PS bedroom rollers but not sure how to get to them. The cover in the photo is loose but will not come off. Reluctant to put more than mild force. Anyone have any dvise? Jim Clark 2006 Monaco Executive 2017 Ford Fusion Hybrid