redstickbill

Thank you again Frank. Installed the board when I got back to the coach last evening, very happy to say that everything works as it should.

Bill B 07 Dynasty

I will also recommend Rome Truck Parts. I have purchased wiper arms and windshield washer nozzles from them for my coach.

Bill B 07 Dynasty

The folks at "Ugly Film" used steam and plastic razors, then a solvent to remove the residue. Took two days for the entire front of the coach, cost was$2000 less a Military Discount. When finished, the coach looked new.

Bill B 07 Dynasty

Rik,

My drivers seat does not get uncomfortable, I am approaching  390,000 miles. Maybe I have a tougher behind ?

Bill B 07 Dynasty

Rick,

In my 07 coach the bedroom has closets alongside of the bed, the switches you show are mounted in the side of the cabinet, the Aladdin "joystick" is mounted next the monitor with the fan switch below it, the multiplex switches are mounted below the Aladdin monitor.

Bill B 07 Dynasty Squire VI

I am with Tom on this one, not sure how I damaged the mud flap metal pieces. Between my supervision and a grandson's muscles, got the pieces straightened and back together. 2 x 12's can be your friend, project took about 1 hour. Space to work helps.

Bill B 07 Dynasty  ( machine shop experience came in handy)

I would suggest Northwest R V supply, they carry many out of stock items, (541) 746-9092.

Bill B 07 Dynasty

Jay,

I have no idea, the one coach I saw in the factory was having the entire floor covered with tile.

The tile extends back to the bedroom vanity, then carpet. I have a one bathroom mid coach.

Bill B

James,

Subfloor was replaced, guess I didn't replace enough, guess it needs more replaced. Darn, and I thought I was close to finishing the project.

Bill B

In my 07 Dynasty I have replaced a section of flooring that was damaged due to a slide seal leak, while waiting for the time to complete the project and replace some of the tile, the floor makes a creaking noise when walked upon. How do I eliminate the creaking before re-laying the tile ?

Thank you in advance,

Bill B 07 Dynasty

If one tile lifter and cracked, then another is lifting, I would strongly suggest you get to looking for a leak, starting with the toilet. With great care any tile not broken can be removed and reclaimed.  Been there, done that.

My 07 Dynasty came with 5 spare tiles, taped together and in the wardrobe closet.

Bill B 07 Dynasty

Give a call to Lloyd DeGerald at 501-258-8426. Lloyd and his son have been my "go to" Aqua-Hot techs for a number of years.

Bill B 07 Dynasty

I have elected to go with painting the the bottom layer of flooring with FlexSeal, I will do something with the underbelly fabric in a couple of weeks when I get back to my homebase and have level pad and warmer weather conditions.

Thank everyone for the suggestions, they are greatly appreciated.

Bill B 07 Dynasty

I am about to make repairs to the flooring where there was a leak at the slide seal. In removing some of the rotted wood underlayment I damaged the underbelly fabric.

What can be used to replace the damaged fabric ?

Bill B 07 Dynasty

The panels in the overhead of my compartments are screwed in place. My water leak was the ice maker like had rubber a hole in it where it was clamped to the overhead in the compartment forward of the wet bay.

Bill B 07 Dynasty

Try Northwest RV Supply, 541-746-9092

Bill B 07 Dynasty

The above referenced solenoid looks exactly like the fresh water auto fill valve. The switch on my 07 Dynasty is on the face of the panel in the wet bay, along with the fresh water hose reel, water pump, power cord reel and sanicon switch. Hope this helps.

Bill B 07 Dynasty

Loel,

I purchased the brass 1/2" check valve at Home Depot, it has SharkBite ends, I also had to purchase two flex hoses to get everything together with the check valve in the same position as the OEM valve. For me it was a tight working area and I have the bruises on my arms to prove it, not exactly fun for an old guy.

Bill B 07 Dynasty

The pump running after shutting the water off at the spigot indicates , to me, that you have a failed check valve between the fresh water holding tank and the pump discharge.

I recently had the same problem , changed out the check valve and problem solved. Bought a brass 1/2" check valve at Home Depot.

Bill B 07 Dynasty

JTerry,

As Steve mentioned a photo would help, another is the location of the tile, near the toilet, under the end of a slide, for example.

My experience has led to the discovery of damaged flooring due to water intrusion.

Bill B 07 Dynasty

Yes connect around the solenoid, then cut one of the two small wires and fold it back onto itself and tape up, this will take the "Salesman" switch out of service.

Bill B 07 Dynasty

Depends where you are parked, if outside the office, you will have 50A electric, water is possible if you only want to refill the fresh water holding tank, sewer is not available. Should you be parked at the other yard, there should be electric.

Best to go in with full water, empty gray and black tanks.

Bill B 07 Dynasty (last time there was in Feb this year)

Rick,

I don't know that your Diplomat has anything. I use the VMSpc and am pleased with it. I have heard lots of good things about the BlueFire system.

Check the files section of our site.

Bill B 07 Dynasty (former Diplomat and Endeavor)

Oly,

A couple of things come to mind, possible air leak at the Nason switch under the parking brake knob, close to low hydraulic level in the reservoir for the hydraulic jacks.

Hope this helps,

Bill B 07 Dynasty (past Diplomat and Endeavor)

Perhaps an "O" ring would work. Ace Hardware can be your friend.

Bill B 07 Dynasty