James Selby

Thank you!! I have one on the way now!! 

I have a 2006 Monaco Dynasty. 400 ISL. I need the part number for the A/C drier Thank you for your help

James

Mine is under my kitchen sink in the cabinet. 

I damaged a door on mine. I bought a used door from Visone RV Parts Salvage. Door was roughly 1200.00 Had it painted and installed. It's the paint job that costs. Mines good as new. REV would make me a door for roughly 2500.00. My door was bent pretty bad. The labor to repair it was going to be as much or more than the used door. 

on mine it was a bad connection in a terminal in the connector on the back of the buttons. When that happened all the buttons stayed lit and nothing would worked till I remedied the issue. 

Colaw RV Salvage

Carthage, MO

(877)548-2125

what bulb is in the grab handles?

Visone RV Parts

243 Fields Ln

East Berndadt, KY 40729

rvbodyparts@gmail.com

(606)843-9889

they had boxes of various lighted handles when I was there February

I have a button on my kitchen lighting panel to turn the hot water dispenser heat on/off.  Look under the sink to see if it has a tank, roughly the size of a coffee can. 

if it's a Delta type faucet, there is a brass or plastic nut that screws down to hold the ball in place. It can be tightened a to put more friction on the ball. You can access it by removing the handle. You may wish to buy a repair kit. The kit will have a special wrench that has an allen on one side to remove the handle and a spanner wrench to tighten the nut. 

On 3/22/2020 at 11:02 AM, Busnut said:

Monaco emblem update 

Looks great!! 

I’m sure it will mount up nicely!! If you have questions I’ll tell you what I did to mount mine. 

I'd have to measure and get back to you. Roughly 6" wide x 4" tall x 1/2" thick. It fit perfectly into the emblem indention on the front of my coach. 

1 hour ago, Busnut said:

Does anyone have the size .  Would like to add one to ours 2003 Executive.

Mines a 2006 Dynasty. It fit perfect I know the emblem is for a much later coach than mine. All I can say is order it. 

Mine’s mounted too!! Thank you for the part number!! 

10 minutes ago, Scotty Hutto said:

@Warren B

How is the emblem attached?  I purchased one and it's plastic with rivet(??) holes. Did you use rivets, screws, or ???  (My coach had a sticker, so I have to drill the holes to attach the "real" emblem)  When I purchased it, I was thinking it would have screw holes or use auto trim adhesive...  

Any advice / guidance would be appreciated. I can figure out a way, but since you've already invented that wheel...

my original emblem was attached with body molding tape (rubber tape with adhesive on both sides). I ordered a couple of new emblems from the Monaco parts site. One is to arrive this Friday. I'll see what I get. I'll share my experience. 

for drilling your holes. You may be able to make a template by using a  copy machine to make a copy of the back of the emblem, if it's flat

On 2/9/2020 at 6:31 PM, Warren B said:

James,

You can get a new emblem from REV parts online.  The part number is 10115987 and was $22.77 plus tax and shipping.

I ordered it and another one that was listed on the site. I'll see if it'll work. Thank you for your help!!

On 2/9/2020 at 6:19 PM, Karl Hampton said:

It looks great! What kind of coating and where did u have it done?

karl H

it's Raptor rhino liner. I was hesitant when the body man suggested it. It looks great and is supposed to be tough tough tough!! 

I have a 2006 Dynasty. The diamond coat on the front was bad. I had a new coating put on. I need a new Monaco emblem for the front.